Chassis Connector 4 Solder Contacts, 1 LC Duplex Socket and 1 Shell Ground Contact for SMPTE Cable Shield

NO2 4FDW 1 A

Overview

Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP-*.

The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.

Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

Features

• Suggested OEM equipment connector due to LC front compatibility

• Designed as feedthrough with automatic sealing shutter

• Shutter with silicone gasket protects optical connection from dust and dirt

• Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage

• Accommodates standard LC connectors on the rear for simple installation

• Connection on the front side either by rugged opticalCON or standard LC connector

• The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations

• IP65 ingress protection in mated condition with SCDP-*

• Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard:

• Multimode - black

• Single mode PC - blue

• Single mode APC - green