34 x 16 Matrix Mixer / Signal Processor with Dante

MTX5 D

Overview

Designed primarily for multi-zone commercial installations, MTX Series matrix processors are equipped with flexible processing functions that are essential to a wide variety of applications such as retail stores, restaurant/bars or banquet rooms. Responsible for the primary processing functions at the heart of your system's design, MTX processors allow you to configure, program, and manage your entire sound solution via the intuitive interface of the accompanying MTX Editor software application. The series is comprised of two models with varying DSP capacities and expansion capabilities, allowing MTX processors to meet the demands of a truly impressive range of commercial environments.

Dante for MTX (MTX5-D, XMV-D only)

The MTX5-D is equipped with dual Dante ports that allow 16 channels of inputs and outputs @44.1kHZ/48kHz to be run on a redundant network. Both simple and larger, sophisticated Dante network systems can be created using MTX5-D and the Dante enabled XMV-D amplifiers.

Audinate’s Dante Network Audio Protocol has been adopted, not only in Processors and Power Amplifiers, but also in many other types of digital audio equipment such as Yamaha Digital Mixing Consoles. In Ver 3.2 and later, supports the HA control of the I/O rack "Rio series"and "Tio 1608-D". This makes it the perfect backbone for larger networked audio systems particularly as connections are not limited to a 30m maximum as with YDIF, but can carry audio up to 100m over CAT5e cable.

A Dante digital network handles all the audio and control data making system alterations and expansion easy. New devices can be added to the network via a single CAT5e cable and quickly configured using the MTX-MRX Editor. Dante networking provides superior system flexibility as well as plenty of capacity for future expansion.

Features

• 34 x 16 Matrix Mixer / Signal Processor

• 8ch mic/line input and 8ch analog output

• 16ch YDIF digital I/O

• 16ch Dante digital I/O

• 1x MY Card slot

• SD Card Slot for playback

Specifications

• Memory bank PRESET: 50

• Mixing Capacity

• Mixing Channel : 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix

• Output Busses : 16 Mono

• Input Channel Functions

• Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8)

• Stereo CH: 3-band PEQ, Comp, Auto Gain Control

• Output Channel Functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter

• Internal Processing Priority Ducking, Ambient Noise Compensator

• Sampling frequency rate 48kHz/ 44.1kHz

• Signal delay Less than 3.0ms (AD-DA @48kHz)

• Total harmonic distortion*1 Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)

• Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB

• Dynamic range 107dB (Gain:-6dB)

• Hum & noise level(20Hz to 20kHz), Rs=150 ohms -60dBu (Gainï1/4š+66dB), -83dBu (Gainï1/4š-6dB)

• Phantom Power +48V

• Crosstalk (@1kHz) -100dB

• Heat diffusion 55.9kcal/h max

• Power requirements AC100V-240V 50Hz/60Hz

• Power consumption 65W

• Dimensions W 480mm (18.9") 480mm (18.9") xH 44mm (1.7") 88mm (3.4") xD 362mm (14.3") 351mm (13.9")

• Weight 4.8kg (10.6lbs) 6.3kg (13.9lbs)

• *1 Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz.

• *2 Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz; equivalent to 20kHz filter with infinite dB/Oct attenuation