Overview:
AEQ OP-01 Chassis with capacity for 20 modules,audio metering and PFL monitoring.The mixer is fitted with two VU-meters. One of them is assigned permanently to master (L and R), and the other one to PFL/SEL. The master output signal is sent pressing the MASTER selector,the auxiliary output signal is sent by means of the AUX selector,the PFL by means of the PFL selector and the external signals that are coming in through the I/O Connector are sent by means of their respective EXT1 and EXT2 selectors.
- The level of the signal or signals selected for control room monitoring is adjusted by means of the MONITOR LEVEL rotary control , for the control room speakers, and by means of the H/PHONES LEVEL rotary control if the H/PHONES headphones outputs located on the lower part of the module) are used.
- This level can be metered on the PFL/SEL VU-Meter if the switch PFL/SEL is pressed selecting SEL.
Nonetheless, the function of both VU-meters can be modified by means of the configuration jumpers located on the rear part of the VU-meter board:
- PDP3 (1-C), PDP1 (1-C): Master assignment.
- PDP3 (3-C), PDP1 (3-C): PFL/SEL assignment.
- PDP4 (2-C), PDP2 (2-C): Auxiliary assignment.
The 0 Vu adjustment is carried out by means of the potentiometers P1 and P2 on the same board. To access this board, remove the mixer’s rear panel.