1.) JACK/FEMALE XLR INPUTS (BAL/UNBAL). The system accept jack or XLR input connectors. These balanced inputs can be used to connect balanced or unbalanced microphones or audio sources at line level. The balanced connector is connected in parallel and can be used to send the audio signal to other amplified speakers, recorders or supplementary amplifiers.

2.) LIMITER LED. The amplifier has a built in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers. When the soft clipping circuit is active the LED blinks RED. It is okay if the limit LED blinks occasionally. If the LED blinks frequently or lights continuously, turn down the signal level.

3.) SIGNAL LED. The signal indicator lights green if there is signal present on the main input.

4.) POWER STATUS LED. This green led is ON when the speaker is connected to the main power supply and the ON/OFF is in ON position.

5.) MALE XLR SIGNAL OUTPUT. The output XLR connector provides a loop trough for speakers daisy chaining.

6.) VOLUME CONTROL. Adjust the amplifier volume. This control does not affect the “Link” - “Input - Link” output level.

7.) FLAT/BOOST SWITCH. Set the flat or boost equalization. “Boost” equalization is a loudness recommended for background music applications, when the system plays at a low level. For all other applications “Flat” equalisation is recommended.

8.) INPUT SENSITIVITY SWITCH. Position the switch in LINE to use a line level source (0 dB) or MIC to use a microphone source.

9.) IEC AC SOCKET. The IEC AC socket connect the power cord to the socket

10.) FUSE CARRIER. Mains fuse housing

11.) POWER MAIN SWITCH. The power switch turns the AC power ON and OFF.

Technical Specifications:

ACOUSTICAL SPECIFICATIONS

• Frequency Response -3 dB:......................45 Hz ÷ 20000 Hz
• Max SPL:.................................................130 dB
• Horizontal coverage angle:.......................90°
• Vertical coverage angle..............................:60°
• Compression Driver:......................................1", 1.7" voice coil
• Woofer:.....................................................15", 2.5" voice coil

INPUT/OUTPUT SECTION

• Input signal..................................:bal / unbal
• Input connectors:..........................Combo xlr-jck
• Output connectors:.........................XLR
• Input sensitivity:...............................- 2 dBu / +4 dBu

PROCESSOR SECTION

• Crossover frequencies:....................1650 Hz
• Protections:..............................Thermal, rms
• Limiter:.....................................Fast limiter
• Controls:............................Volume, EQ Shape, Mic/Line

AMPLIFIER SPECIFICATIONS

• Total power:..........................1200 W PEAK
• High frequencies:..................400 W PEAK
• Low frequencies:...................800 W PEAK
• Total power:..........................600 W RMS
• High frequencies:..................200 W RMS
• Low frequencies:....................400 W RMS
• Cooling:...................................Convection
• Connections:.....................VDE connector in / out

CABINET

• Cabinet Material:................Baltic birch
• Hardware:......................3 x Flytracks
• Handles...............................:2 side
• Pole Mount/Cap...................:Yes
• Colour:................................Black

PHYSICAL SPECIFICATIONS

• Height:................708 / 27.87 mm/inch
• Width:...................430 / 16.92 mm/inch
• Depth:......................430 / 16.92 mm/inch
• Net Weight:..............27.5 / 60.62 kg/lbs