PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Price | |
---|---|
Discounted Price | Php 25,588.00 |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
Points :255.88(1.00%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Selected by customer |
Shipping Cost | International Shipping Fee |
Description |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
HARTKE A100 BASS COMBO
Overview:
Hartke's A100 Bass Combo offers the transient respose and tone of an aluminum cone driver in a compact design with an arsenal of features that bass players crave.
1.) Active - Connect your bass guitar to this standard 1/4" unbalanced jack. This A series input was designed to handle the signals from hotter bass pickups if your bass has active electronics (that is, if has a battery)
2.) Passive - Connect your bass guitar to this standard 1/4" unbalanced jack.
3.) CD input - Your A series amplifier features a CD input high you can use with a portable CD player,cassette,mini disk or MP3 player. You can use the CD input to jam with pre-recorded tracks or to learn a riff from a favorite recording
4.) Volume Control - This is the overall volume control.
5.) Bass EQ Control - This control provides approximately 15 db of cut or boost at 100 Hz, with a peak (bell) curve.
6.) Treble EQ Control - This peaking control provides approximately 15 db of cut or boost or attenuation. (that is, flat response)
7.) Graphic Equalizer - These silders allow you to "draw" the tonal response of the system by ading 15 db of boost or attenuation to ten different narrow-band frequency areas , affecting the main output signal of the A70 and A100.
8.) Limiter Control - This determines the amount of compression by simultaneously adjusting both threshold and compression ratio.
9.) Limiter LED - Provides a visual indicator of the status of the compression ciruitry
10.) Phone Jack - Connect any stereo headphone (600 ohms or less) to this standard 1/4" stereo jack.
11.) Power Switch - Use this to power the A series on or off. When powered on, an LED inside this switch is lit.
Rear Panel Features:
A. AC Power Inlet - Use the supplied grounded AC power cord to connect your A series amplifier to mains power
B. Speaker Output - This jack is used to connect the internal 8-ohm aluminum driver
C. Direct Output - This standard balanced XLR connector provides a line level pre-EQ and pre Volume output signal from the A series amplifier
D. Preamp Out (Effects Loop Send) - Use this 1/4" unbalanced jack to send signal to a professional outboard effects processor
E. Amp In (Effects Loop Return) - Use this 1/4" unbalanced jack to return signal from a professional outboard effects processor
Specification:
Rated output Power (@1 kHz , 4Ohm, 1 %THD )
Rated Input Level ( @ 1 kHz)
Total Harmonic Distortion (@ 1 dB below rated output , 1 kHz typical
Signal to Noise Ration (re: 1 Wrms @ 1 kHz)
Dynamic Range (re: Rated output @ 1 kHz)
Signal Gain
Equalizer
Headphone Output
Fuse Type
Weight
Dimensions
Product Name | A100 |
---|---|
Brand | HARTKE |
Sale Price | Php 25,588.00 |
Mileage | Points :255.88 |
수량 | |
Product Code | P0000MQY |
Product Details | 1x15-inch Combo Bass Amplifier (100W) |
QR Code |
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720