Processed Active Sound System 15 Inches + 2 x (6, 5 Inches + 1 Inch) - 500 WRMS + 2 x 150WRMS

AMICO 10 USB

Overview

AMICO 10 USB is a completely integrated, ready-wired sound system. The mixer amplification is a 15" subwoofer and three PWM processed amplifiers are contained in a single ultra lightweight, yet sturdy polypropylene enclosure. It offers a professional mixing input channels with built-in class D power amplifiers and switch mode power supply. The system is powered by AC mains.

• Analog audio processor with 24dB electronic crossover network and ADAP (Advanced Dynamic Active Protection) for total protection of the components

• Removable back panel for access to the satellite speakers’ storage compartment. This protects the satellite speakers and keeps them secure when transporting the complete system

• Multi-function knobs to block, unblock, and remove the cover/ lid transport handle

• A quick and easy set-up: complete system setup in less than 5 minutes! Just connect the satellite speakers to the AMICO 10USB amplifier outputs using the optional Speakon speaker cables and connect the AC power cable to an AC wall outlet

• USB input/output to play back music programs from a computer or to record from the master audio output of the AMICO 10USB to a computer - recording program

• Built-in mixing console with 6 x XLR mic inputs with phantom power supply, 2 x mono inputs and 4 x stereo input channels, 3-band EQ, 99 selectable digital effects with effects send and return controls

• 3 Class D power amplifiers with switch mode power supplies to power the subwoofer and the two satellite speakers

Features

• 3-way, tri-amplified Bass-Reflex system

• 14 channel mixer with 99 presets digital multi-effect and phantom power

• USB connection for music programs in play and record

• Subwoofer: 380mm (15") high efficiency and high excursion custom woofer with a 75mm (3") voice coil

• 2 x two way satellite speakers, featuring 165mm (6.5") woofers with 38mm (1.5") voice coils, and a 25mm (1") compression driver couple to a 90°H x 60°X constant directivity horn

• 500W RMS Class D amplifier for subwoofer

• 2 x 150W RMS Class D amplifier for the satellite speakers

• Switch mode power supply

Specifications

• Configuration: 3 WAY / SUB+2SAT

• Internal Amplifiers: 500 + 2x150 Wrms

• Mixer Channels: 2mono + 4stereo

• Mono Channels

Micro

• Quantity and type: 2 x XLR F

• Impedance: 2,2 kohm

• Max input signal: 0 dBu

• Max gain: 75 dB

• Equivalent input noise: -128 dB

• CMRR (@ main out, gain 75dB): -80 dB

Line

• Quantity and type: 2 x JACK balanced

• Impedance: 33 kohm

• Max input signal: 30 dBu

• Max gain (@ main out): 40 dB

Tone

• High Shelving (@ 12kHz): ±15 dB

• Medium Peaking (@ 2,5kHz): ±12 dB

• Low Shelving (@ 80Hz): ±15 dB

• Stereo Channels

Micro

• Quantity and type: 4 x XLR F

• Impedance: 22 kohm

• Max input signal: 0 dBu

• Max gain: 75 dB

• Equivalent input noise: -128 dB

• CMRR (@ main out, gain 75dB): -80 dB

Line

• Quantity and type: 8 x JACK balanced

• Impedance: 22 kohm

• Max input signal: 30 dBu

• Max gain (@ main out ): 18 dB

Tone

• High Shelving (@ 12kHz): ±15 dB

• Medium Peaking (@ 2,5kHz): ±12 dB

• Low Shelving (@ 80Hz): ±15 dB

Outputs

• Impedance: 600 ohms

• Mx output (Monitor, Eff, Tape In): 22 dBu

• Distortion + Noise @ 16 dBu: 0,025%

• Signal/Noise ratio: 96 dB

• Frequency response (@ 0 / -1dB): 20Hz - 20kHz

• Built In Effect

• Sample frequency: 48 kHz

• Frequency response: 20Hz - 20kHz

SUB

• Configuration: 1 Way

• Internal amplifier: 500W SUB + 2 x 150W SAT Wrms

• Frequency response @-6dB: 40Hz - 120Hz

• Sensitivity (@1W, 1m): 97 dB

• Maximum SPL (cont-peak): 124/130 dB

• Dispersion: Omni-directional O x V

• Low frequency woofer: 1x15 inch

• SAT output connectors: 2 x SPEAKON

Satellite

• Configuration: 2 Way

• Internal amplifier / Recommended: -/150 Wrms

• Impedance: 4 ohms

• Frequency response: -6dB 90Hz - 20kHz

• Sensitivity (@1W, 1m): 93,5 dB

• Maximum SPL (cont-peak): 115/125 dB

• Dispersion: 90° x 60° O x V

• Low frequency woofer: 1x6,5 inch

• High frequency driver: 1x1 inch

• Input connectors: 1 x SPEAKON

• Power supply cable: 5m / 197 Inch

• Net dimensions (WxHxD): 478 x 780 x 433mm / 18,8x30,7x17 Inch

• Net weight: 34 kg / 74 lb

• Transport dimensions (WxHxD): 570 x 880 x 570mm / 22.4 x 36.5 x 22.4 Inch

• Transport weight: 38 Kg / 81.6 lb

• Supplied accessories: Carrying cover, twin cables, 2 aluminium stands