Bodypack Wireless System

ATW 2110 BL 497M EX

Overview

The Audio Technica ATW-2110 BodyPack Wireless System is a frequency-agile UHF wireless system designed to suit a variety of applications, including live performance, fixed installation, public address, A/V rental houses and places of worship.

The Audio Technica ATW-2110 BodyPack Wireless System contains an ATW-R2100 receiver and ATW-T210 body-pack transmitter. Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.

ATW-R2100 Receiver

The ATW-R2100 Receiver features True Diversity operation which selects between two receiver sections, reducing dropouts and radio frequency interference. The receiver features 10 user selectable UHF frequencies, allowing 10 systems to be used simultaneously. Single touch frequency scanning automatically selects clear frequencies in the area. The rear panel features a balanced XLR output and unbalanced 1/4" phone connection. A back-lit LCD provides channel, AF, RF and diversity status information.

ATW-T210 Body-Pack Transmitter

The ATW-T210 BodyPack Transmitter is a lightweight body pack microphone transmitter that operates on the same frequencies as the receiver. The transmitter features a 4-pin Hirose connection input that is compatible with Audio-Technica "CW" lavaliers and head worn microphones, and select instrument cables. The transmitter operates up to 9 hours on two 1.5V AA batteries. Offering 10 selectable channels and True Diversity UHF wireless technology, the Audio Technica ATW-2110 Bodypack Wireless System features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The Audio Technica ATW-2110 Bodypack Wireless System also incorporates Audio-Technica’s Tone Lock™ squelch plus an easy-to-read LCD information display.

Features

• Band bI: 487.125 to 506.500 MHZ

• 10 Selectable UHF Frequencies

• ATW-R2100 UHF Diversity Receiver

• ATW-T210 UniPak TransmitterSerious advances in affordable professional wireless

• Clear sound quality and rock-solid, dependable performance

• Automatic frequency scanning

• 10 compatible user-switchable channels in one of two UHF frequency ranges

• Antenna power available for powered antennas & other in-line RF devices

• True Diversity operation selects the better signal from the two receiver sections, reducing dropouts

Specifications

Overall System Specs

• Number of Channels: 10 Total

• Modulation Mode: FM

• Maximum Deviation: ±40 kHz

• Dynamic Range: > 110 dB (A-Weighted), Typical

• Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz Deviation)

• Operating Range: 100 m (300'), Typical, (Open Range Environment with No Interfering Signals)

• Operating Temperature Range: 5º C to 45º C (41º F to 113º F) (Battery and LCD Performance May be Reduced at Very Low Temperatures)

• Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)

Receiver Specs:

• Maximum Output Level:

• XLR, Balanced: +9 dBV

• ¼" (6.3 mm), Unbalanced: +4 dBV

• Balanced Audio Output Attenuator:

• Two Position Switch: 0 / -12 dB

• Receiving System: True diversity

• Image Rejection: 60 dB Nominal, 55 dB Minimum

• RF Sensitivity: 20 dBuV at 60 dB S/N Ratio (50 Ohms Termination)

• Antenna Input: BNC-Type, 50 Ohms, Bias Voltage 12V DC, 60 mA, Each

• Power Requirements: 12-18V DC, 500 mA

• Dimensions: 210.0 mm (8.27") W x 162.2 mm (6.39") D x 44.0 mm (1.73") H (Not Including BNC Connectors or Feet)

• Net Weight: 1.0 kg (35.3 oz), Without Accessories

Body-Pack Transmitter Specs:

• RF Power Output: High: 30 mW, Low: 10 mW (Switchable), at 50 Ohms

• Spurious Emissions: Following Federal and National Regulations

• Input Connections: Four-Pin Locking Connector

• Pin 1: GND

• Pin 2: INST INPUT

• Pin 3: MIC INPUT

• Pin 4: DC BIAS +9V

• Batteries: Two 1.5V AA Alkaline (Not Included), or Two 1.2V AA NiMH (Not Included)

• Battery Life: High: 7 Hours (Alkaline), Low: 9 Hours (Alkaline) Depending on Battery Type and Use Pattern.

• Dimensions: 66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H

• Net Weight: 81 g (2.9 oz), Without Batteries