• Very broad 160° coverage pattern
• 60 mm (2.5 in) mid-high driver with butyl rubber surround
• 16-ohm driver, allows paralleling of multiple units on a low-Z amplifier
•  Integrated back can for easy “blind-mount” install. Packaged with grille and C-ring support backing plate for easy installation.

•  The Control 42C is an ultra-compact inceiling professional satellite loudspeaker designed for use with the Control 40CS/T subwoofer. When combined with the Control 40CS/T, the Control 42C offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance with minimal visual impact.
• The integrated backcan on the Control 42C combined with the C-ring support backing plate allows for a quick and easy installation of the unit. The system’s 60 mm (2.5 in) mid-high driver features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former offers low distortion.
• The 16-ohm impedance allows paralleling up to 4 speakers on a 4-ohm capable amplifier. The Control 42C must be operated with either an active high-pass filter or a passive crossover, such as the one built into the Control 40CS/T subwoofer, to protect it against damage from low frequencies.
•  Because of the very light weight of Control 42C, tile rails may not be required for many in-ceiling applications. They are not packaged with this model, however MTC-RAIL tile rail sets are available separately.
•  Housed in a compact package, the lightweight Control 42C features an elegant, unobtrusive design and is ideal for both small and large projects alike.

Specifications

System:

• Frequency Range (-10 dB).........................140 Hz - 20 kHz
• Frequency Response (± 3 dB) .........................180 Hz - 17 kHz
• Power Capacity2......................... 30 Watts Continuous Program Power 15 Watts Continuous Pink Noise
• Nominal Sensitivity (2.83V/1m) .........................82 dB
• Nominal Coverage Angle3.........................160° conical coverage
• Directivity Factor (Q)3.........................6.6
• Directivity Index (DI)3.........................6.8 dB
• Rated Maximum SPL: .........................94 dB @ 1 m (3.3 ft) average, 114 dB peak
• Rated Impedance: ......................... 16 ohms
  Transducer:
• Driver: .........................60 mm (2.5 in) with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former.
  Enclosure:
• Input Connectors: ......................... Two removeable locking 2-pin connectors with screwdown
• terminals. Max wire 12 AWG (2.5 mm).
• Knockouts: .........................Two (top and side)

Safety Agency

• Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 & NFPA 70. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.

Dimensions:

•  127 mm Diameter x 94 mm depth (5.0 in x 4.2 in) fromback of baffle
• Cutout Size: 104 mm Diameter (4.1 in)Ceiling Thickness Range: Accommodates tiles/drywall up to 27 mm (1.1 inches)thick

Weight: ......................... 0.7 kg (1.6 lb)

• C-ring support backing plate, knockout strain relief,cutout template, paint shield.

• MTC-RAIL tile rails
• MTC-42NC New Construction bracket
• MTC-42MR Mud Ring Construction Bracket