JBL CONTROL 47C/T
6.5-inch Consistent Coverage
Extended Bass
(1 pc)
Overview
The
Control 47C/T features extended bass performance with a wide 120° of coverage
that allows fewer speakers to cover a large space. Ideal for a wide variety of
applications, the Control 47C/T is perfect for settings ranging from restaurant
and retail to large casinos and beyond.
Features
- Extremely
consistent 120° broad band pattern control featuring JBL’s exclusive conical
Radiation Boundary Integrator® (RBI™) technology.
- Provides very consistent coverage of
listening area.
- Wide coverage requires fewer speakers,
reducing the cost of the installed system without sacrificing performance.
- Coaxial design featuring:165 mm (6.5 in)
woofer with butyl rubber surround.
- 25 mm (1 in) soft-dome tweeter on 250 mm (10 in) diameter wave guide.
- Bass extension to 55 Hz.
- 8 ohm and 70V/100V operation.
- Integrated back can for easy “blind-mount”
install. Packaged with grille and tile rails for easy installation.
Application
- The
Control 47C/T is a premium inceiling professional loudspeaker designed for
applications that require extremely wide bandwidth along with very consistent
coverage.
- Featuring JBL’s exclusive conical Radiation Boundary Integrator® (RBI™), the
RBI provides a large waveguide for the tweeter while low-frequency sound
projects through specially-designed apertures in the RBI, allowing for a
seamless integration of coverage between the two coaxiallymounted drivers. The
result is extremely consistent sound character with very little variation
throughout the listening space. The wide coverage allows for the use of fewer
loudspeakers compared to speakers with less consistent coverage control, while
at the same time providing better coverage of the area.
- The large backcan on the Control 47C/T, along with the LF driver design,
provides extended bass response for a warm fullbodied tone. The system’s 165 mm
(6.5 in) woofer features a polypropylene cone and pure butyl-rubber surround
for long life. The copper-clad aluminum voice coil wound on a vented aluminum
former provides low distortion and high sensitivity. The coaxially mounted 25
mm (1 in) soft dome features internal damping for smooth extended response and
ferrofluid cooling for enhanced power handling and reduced power compression.
The result is crisp, clear highs.
- Ideal for small and large projects
alike, the Control 47C/T is switchable for use as either an 8-ohm low-impedance
speaker, or as part of a 70V/100V distributed loudspeaker system.
Specifications
- Frequency
Range (-10 dB): .........................55
Hz - 20 kHz
- Frequency
Response (± 3 dB):
......................... 75 Hz - 17 kHz
- Power
Capacity2: .........................150
Watts Continuous Program Power 75 Watts Continuous Pink Noise
- Nominal
Sensitivity: .........................91
dB
- Nominal
Coverage Angle: .........................120°
conical coverage
- Directivity
Factor (Q):
......................... 6.5
- Directivity
Index (DI): .........................7.9
dB
- Rated
Maximum SPL: .........................110
dB @ 1 m (3.3 ft) average, 116 dB peak
- Rated
Impedance: .........................
8 ohms (in bypass mode)
- Transformer
Taps: .........................60
W, 30 W, 15 W, (& 7.5 W @ 70 V)
- Transformer
Insertion Loss:
......................... 0.76 dB @ 60 W, 0.70 dB @ 30 W, 0.61 dB @ 15
W, 0.58 dB @ 7.5 W
Transducers:
- LF
Driver: .........................
165 mm (6.5 in) with polypropylene cone, butyl rubber Surround, copper-clad
coil, vented aluminum former.
- HF
Driver: .........................25
mm (1 in) soft dome w/ dampening, ferrofluid-cooled.
Enclosure:
- Input
Connectors: .........................Two
removeable locking 2-pin connectors with screwdown terminals. Max wires 12 AWG
(2.5 mm).
- Knockouts:
.........................Two
(top and side)
Safety
Agency:
- Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 & NFPA
70. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876.
Inaccordance with IEC60849/EN60849.
- Dimensions:
.........................305
mm Diameter x 259 mm Depth from back of baffle (12 in x 10.2 in)
- Cutout
Size: .........................282
mm Diameter (11.1 in)
- Ceiling
Thickness Range:
......................... Accommodates tiles/drywall up to 70 mm (2.75
in) thick
- Suspension
Points: .........................Three,
on top surface
- Weight:
.........................5 kg
(11 lb)
Included Accessories:
- C-ring support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x
1200 mm tiles), knockout strain relief, cutout template, paint shield, 2
removable locking multipin connectors.
Optional Accessories:
- MTC-47NC New Construction Bracket
- MTC-47MR
Mud Ring Construction Bracket