JBL CONTROL 50PK



with 1 Subwoofer+ 4 Satellite (1 set)



Overview

Packaged Surface-Mount Subwoofer-Satellite

Loudspeaker System

The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surfacemount system.

Control 52 Satellite Speaker 

The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a lowdistortion 60 mm (2½ in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.

Control 50 Subwoofer 

The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance. The Control 50S/T’s included two-piece easy-mount wall-bracket installs quickly: The multi-point wall portion of the bracket attached to the wall and the self-guiding speaker-mounted bracket drops into place for a secure attachment. A cover over the Control 50S/T terminal cup keeps wiring neat. The Control 50S/T is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52 satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.

System Configuration

Available as packaged system or as separate items, the Control 50 Series is extremely versatile system. The C50PACK system contains four Control 52 satellite speakers and one Control 50S/T subwoofer as an easy predesigned system. For smaller floor spaces, the Control 50S/T subwoofer can be utilized with two Control 52 satellite speakers. The Control 50 system is mono. Both the Control 50S/T and Control 52 can be intermixed in systems along with the Control 40 Series in-ceiling models – Control 40CS/T subwoofer and Control 42 satellite speaker – to match the form factor requirements of a wide variety of applications.

Features

Versatile four satellite speaker system

Stylish, unobtrusive design fits into a wide variety of decor

High fidelity sound

Selectable 70V/100V for distributed lines, or low impedance

Wall-mount brackets include

Available in black or white

Specifications:

Control 50 Subwoofer-Satellite System Specifications

Frequency Range (-10 dB)1: -----------------------32 Hz – 20 kHz

Frequency Response (±3 dB) 1 : ----------------------- 50 Hz – 17 kHz

Power Capacity2: -----------------------200 Watts Continuous Program Power (100 hrs)
                               ----------------------- 100 Watts Continuous Pink Noise (100 hrs)

Nominal Sensitivity (2.83V, 1m)1: -----------------------87 dB with 4 satellites
                                                    -----------------------  85 dB with 2 satellites (subwoofer center of wall, higher sensitivity depending on subwoofer boundary loading, see application note).

Nominal Impedance: -----------------------4 ohms (in bypass/thru mode) with 4 satellites

                                     ----------------------- 8 ohms (in bypass/thru mode) with 2 satellites

Transformer Taps: ----------------------- 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 on switch to indicate subwoofer impedance).

Control 50S/T Specifications

Frequency Range (-10 dB)1 : ----------------------- 32 Hz – 200 Hz

Frequency Response (±3 dB)1: -----------------------50 Hz – 150 Hz

Power Capacity2:

·         300 Watts Continuous Program Power (2 hrs)

·         150 Watts Continuous Pink Noise (2 hrs)

·         200 Watts Continuous Program Power (100 hrs)

·         100 Watts Continuous Pink Noise (100 hrs)

Nominal Sensitivity (2.83V, 1m)1 : -----------------------95 dB (near corner), 89 dB (center of wall)

Rated Maximum SPL (1m): ----------------------- 115 dB average, 121 dB peak (near corner) 109 dB average, 115 dB peak (center of wall)

Nominal Impedance: -----------------------8 ohms (in bypass/thru mode)

Transformer Taps: ----------------------- 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru

Transducer:

Driver: ----------------------- 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum Former.

Enclosure:

Input Connectors: ----------------------- Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)

Material: ----------------------- Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: -----------------------Painted zinc-plated metal.

Dimensions (H x W x D): -----------------------Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)

Wall Bracket: -----------------------15 mm (0.6 in) deep

Wall Bracket: ----------------------- 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel

Net Weight: -----------------------9.0 kg (20 lbs)

Shipping Weight: ----------------------- 10.2 kg (23 lbs)

Included Accessories: -----------------------Wall bracket (both speaker and wall parts) with 4 pc

Control 52 Specifications

Frequency Range (-10 dB)1: -----------------------140 Hz – 20 kHz

Frequency Response (±3 dB)1: -----------------------180 Hz – 17 kHz

Power Capacity2

·          50 Watts Continuous Program Power (2 hrs)

·         25 Watts Continuous Pink Noise (2 hrs)

·         30 Watts Continuous Program Power (100 hrs)

·         15 Watts Continuous Pink Noise (100 hrs)

Nominal Sensitivity1-----------------------: 85 dB (4.0V/1m = 1W) 82 dB (2.83V, 1m)

Nominal Coverage Angle3-----------------------: 150° x 150° (omnidirectional)

Rated Maximum SPL (1m): ----------------------- 94 dB average, 100 dB peak

Nominal Impedance: ----------------------- 16 ohms

Transducer:

Driver: -----------------------60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.

Enclosure:

Input Connector: Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)

Material: -----------------------High impact polystyrene, painted zinc-plated metal grille.

Dimensions (H x W x D): Cabinet: ----------------------- 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)

Wall bracket: -----------------------51 mm (2.0 in)

Net Weight: ----------------------- 0.7 kg (1.5 lbs)

Shipping Weight: ----------------------- 0.8 kg (1.8 lbs)

Included Accessories: -----------------------Wall bracket (both speaker and wall parts), 2-pin locking connector