2 x 2 Channel Dante Endpoint, 24V

ControlSpace EP22 D 

Overview

The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system. The small form factor of the EP22-D and PoE power capability make it easy to put Dante connectivity wherever it’s needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, output gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer.

Technical Specifications

Audio Inputs

Input Channels Two (2) analog, balanced microphone/line level

Connectors Two (2) 3.81 mm Euroblock, 3-pin

Phantom Power +24VDC, software selectable per input

Gain Settings 0 / +25 / +40 dB, software selectable

Input Impedance > 1.8 kΩ at any gain setting

Equivalent Input Noise –115 dBu (+40 dB gain)

Maximum Input Level +12 dBu @ 0 dB gain

Audio Outputs

Output Channels Two (2) analog, balanced line level, with automatic

muting on loss of Dante signal

Connectors Two (2) 3.81 mm Euroblock, 3-pin

Output Gain 0 / +10 dB, software selectable

Output Noise < –90 dBu @ 0 dB gain

Maximum Output Level +12 dBu

Output Impedance 200 ohms (100 ohms unbalanced)

Software Application

ControlSpace®

 Designer™ software v4.2 or later

General

Digital Conversion 48 kHz, 24-bit

System THD < 0.01 % at any gain, input signal 3 dB below maximum

PoE Class Class 0 802.3af PoE PD compliant

Certifications FCC Part 15 Class A, CE (EN 55022 Class A)

Dimensions 1.06" H x 6.45" W x 3.45" D (27 mm x 164 mm x 88 mm)

Operating Temperature 32 °F – 104 °F (0 °C – 40 °C)