Overview

• Excellent voice range clarity for announcement and paging.
• High sensitivity delivers high sound levels with minimal power amplification.
• Focused 50° horizontal by 70° vertical coverage for long throw capability.
• Phenolic diaphragm driver for outdoor durability and high reliability.
• UL-registered 30-watt multi-tap transformer, with 8 ohm direct bypass.
• Built-in high-pass filter enhances reliability by protecting against low frequency damage.
• Highly weather-resistant, with stainless steel bracket and hardware.

• Public Access Areas
• Warehouses
• Factories
• Schools
• Recreational Facilities
• Commercial Buildings
• Distribution Centers
• Civic Centers
• Other Commercial Sound and Protective Signaling Systems

• Frequency Response (-10 dB) .........................380 Hz –6 kHz
• Coverage Pattern.........................50° horizontal by 90° vertical (at 2 kHz and averaged 1 kHz – 4 kHz)
• Included High-Pass Filter.........................Passive 350 Hz high-pass filter built-in to protect against damage from frequencies below operational range.
• Directivity Factor (Q) .........................15.8 (2 kHz)
• Directivity Index (DI) .........................12 (2 kHz)
• System Power Rating.........................30W (120 W peak), 100 hrs
• Sensitivity (1W, 2.83V@ 1m) .........................108 dB, ave. 1 kHz – 6 kHz; 112 dB at 1.4 kHz

Maximum SPL (1m)

• 123 dB cont ave. (129 dB peak), 1 kHz – 6 kHz;
• 127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input,, 8 ohm setting

Nominal Impedance     

• 30W/70V, NC/100V tap: 167 ohms
• 15W/70V, 30W/100V tap: 333 ohms
• 7.5W/70V, 15W/100V tap: 667 ohms
• 3.8W/70V, 7.5W/100V tap: 1333 ohms
• 1.9W/70V, 3.8W/100V tap: 2666 ohms
• 8 ohms at 8 ohm direct setting
• Transformer Taps........................ 70V: 30W, 15W, 7.5W, 3.8W, 1.9W 100V: 30 W, 15W, 7.5W, 3.8W
• Full-Range Driver........................38mm (1.5 in) diameter with phenolic diaphragm
• Horn Material........................ABS
• Mounting Hardware........................Stainless steel powder-coated U-bracket (yolk) with 3 x 8.8 mm (0.34 in) dia mounting holes, stainless steel exterior hardware.
• Color........................RAL9016 (horn and bracket)
• Input Connection........................300 mm (12 in) pigtail to bare wire; entrance via watertight fitting. Wire colors: red = positive (+); black = negative (-).
• Environmental ........................IP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware.
• Safety Agency Ratings........................Transformer UL Registered per UL1876 “Isolating Signal and Feedback Transformers for Use in Electronic Equipment”
• Dimensions(H x W x D) ........................ 206 x 285 x 287 mm (8.2 x 11.2 x 11.3 in) horn
  224 x 285 x 287 mm (8.9 x 11.2 x 11.3 in) including mounting bracket. Depth excludes cable exit.
• Weight (ea) ........................4.5 lb/2.0 kg
• Shipping Weight (ea) ........................6.0 lb/2.7kg
• Included Accessories........................Stainless steel mounting bracket