PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Product Details
CTS 600
| Price | |
|---|---|
| Discounted Price | Php 58,000.00 |
| Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
| Reward Points |
Points :580.00(1.00%)
|
| Shipping Method | Selected by customer |
| Shipping Cost | International Shipping Fee |
| Description |
| Shipping | |
|---|---|
| Quantity |
|
| Product Info | Product | Remove |
|---|---|---|
| Total(Qty) 0 | ||
Overview:
Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.
Features:
- High-power, 2-channel, 2U rackmount amplifier for installed sound applications
- Switching power supply lowers overall amplifier weight
- Direct 70V/100V/140V/200V constant-voltage or 2/4/8 Ohm low-impedance operation
- Independently selectable Input Sensitivity switching per channel
- Rear panel Programmable Input Processor(PIP2) connector accepts accessory expansion modules for specific custom installation requirements
- Thermal Level Control(TLC) circuitry protects amplifier from overheating; engages input compressor, dynamically reducing input gain when individual channels overheat
- Junction Temperature Simulation(JTS) quick-activation circuitry limits drive level of output devices to tolerable range if excess power is required; protects output transistors without shutting down channel
- Continuously variable fan cooling; venting with front-to-rear forced airflow
- Removable balanced terminal block input connectors with "Y" switch
- Switchable high pass filter per channel, eliminates step down transformer saturation in distributed systems
- Complete array of front panel function and warning indicator LED's for each channel
- Complete array of rear panel function and filter switches
- Power on indicator flashes when AC mains are under or over voltage
- Advanced protection circuitry covers shorted outputs, DC, mismatched loads, overheating, high frequency overloads, voltage fluctuation and internal faults.
Power Output:
- Dual mode, 2 ohms: 150W
- Dual mode, 4, 8 or 16 ohms or 70V: 300W
- Bridge mode, 4 ohms: 300W
- Bridge mode, 8 or 16 ohms or 140V: 600W
Specifications:
Power Rating
- 300 Watts @ 8 Ohms, Dual (Per Channel)
Damping Factor
- 10 Hz - 100 Hz:>3000
Input Sensitivity
Switchable:
- 1.4V(8/4 Ohms)
26 dB Gain:
- 2.46V(4 Ohm Load)
- 3.47V (8 Ohm Load)
- 1.4V(70V)
Input Impedance
- 10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal)
Gain
- 35:1 (31 dB)
Frequency Response
- 20 Hz - 20 kHz +/-0.25 dB @ 1 Watt
Signal-to-Noise Ratio
- 105 dB A-Weighted, below rated power(20 Hz - 20 kHz)
Total Harmonic Distortion (THD)
- < 0.1%, at full rated power (20 Hz - 20 kHz)
Input Connections
- 2 x Balanced 3-Pin Terminal Block Connectors(one per channel)
Output Connectors
- 1 x 4-Pole Terminal Strip(Ch 1, Ch 2)
Controls Front Panel
- 1 x Power Switch
Controls (Rear)
- 1 x Reset Switch
- 1 x Rotary Channel Level Control(per channel)
- 1 x 2-Position Operation Mode Switch
- 1 x Highpass Filter Switch(per channel)
- 1 x "Y" Input Switch
- 1 x Interior 3-Position Input Sensitivity Switch(per channel)
Indicators
Front Panel:
- 1 x Yellow LED Bridge Mode Indicator
- 1 x Green LED Ready Indicator
- 3 x Green LED Signal Indicators(per channel)
- 1 x Red LED Clip Indicator(per channel)
- 1 x Red LED Thermal Indicator(per channel)
- 1 x Red LED Fault Indicator
- 1 x Yellow LED Data Indicator(per channel)
- 1 x Blue LED Power Indicator
Back Panel:
- No Indicators on Back Panel
Cooling
- Continuously Variable Speed Fans
- Ventilation Grille(Front),Cooling Vents(Back)
- Front-to-Rear forced airflow
Power Consumption
- 24 Watts (120 VAC Mains)
Dimensions
- 19 x 3.5 x 14.25" (483 x 89 x 362mm)
Weight
- 22.8 lb (10.3 kg)
Specialties
- Variable Speed Fan Cooling
- Thermal Level Control
- JTS Limiting Circuitry
| Product Name | CTS 600 |
|---|---|
| Brand | CROWN |
| Sale Price | Php 58,000.00 |
| Mileage | Points :580.00 |
| 수량 |   |
| Product Code | P0000BPA |
| Product Details | Power Amplifier (300W) |
| QR Code |    |
Payment
Shipping
- Shipping Method : Selected by customer
- Shipping Area : Nationwide, Worldwide
- Shipping Cost : International Shipping Fee
- Shipping Time : 2 - 6 days
- About Shipping :
Returns/Exchanges
Refunds
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720
