CAT6 UTP Network Cable / Patch Cord 10 Meter

CAT6 Patch Cord 10M

Overview

PROLiNK® CAT6 patch cord is designed with four twisted pairs of cables, ensuring stability of high speed data transmission. It transmits bandwidth of 250 MHz, provides a higher signal-to-noise ratio and allows higher reliability and higher data rates.

PROLiNK®  Cables are designed for your LAN networking needs, supports Gigabit Ethernet (1000 Base-T) standard and backwards compatible. Operates at a bandwidth up to 100 Mhz.

UTP cables are increasingly popular because they are smaller than coax (so cable density is less of a problem) and they are easier to pull than their coaxial cable counterparts.

The effectiveness of UTP cable design which uses twisted pairs without the need for additional shielding have allowed this Type of cabling to be the most cost effective solution available for any Type of advanced local area network connection and made it an industry standard for a wide variety of applications

Specifications

• Operating Temperature70°C

• CONSTRUCTION

• Conductor: 23 AWG (4 pair)

• Conductor Diameter: 0.56±0.02mm

• Insulation: High Density Polyethylene

• Insulation Diameter: 0.95±0.02mm

• Pairs: 2 Insulated conductors twisted together

• Cable Diameter: 5.6±0.15mm

• Printing: Each meter printed with sequential length counter

• Jacket Nominal Wall Thickness: 0.7±0.01mm

• Insulation Nominal Wall Thickness: 0.2mm

• ELECTRICAL PROPERTIES

• Characteristic Impedance

• 1~100MHz: 100Ω±15%

• 100~250MHz: 100Ω±20%

• Conductor Resistance: <20/100m at 20°C

• Insulation Resistance: ≥5000MΩ/KM

• Resistance Unbalance: ≤2

• Dielectrical Strength: 1.0kv,DC,1min

• COLOUR CODE

• AWhite-Blue Stripe and Blue

• BWhite-Orange Stripe and Orange

• CWhite-Green Stripe and Green

• DWhite-Brown Stripe and Brown