Product Details

Back

TNS 118A

Product Info
Price
Discounted Price Php 72,020.00
Discounted Amount Total Discounted Amount KRW
(Mobile Purchase Discount KRW )
Reward Points

Points :720.20(1.00%)

Reward points from Payment by Wire Transfer without Bankbook KRW %

Reward points from Payment by Credit Card KRW %

Reward points from Payment by Reward Points KRW %

Reward points from Payment by Reward Points KRW %

Reward points from Payment by Mobile Phone KRW %

Reward points from Payment by Store Credits KRW %

Reward points from Payment by Escrow KRW %

Reward points from Payment by Virtual Account KRW %

Reward points from Payment by Virtual Account KRW %

Shipping Method Selected by customer
Shipping Cost International Shipping Fee
Description
Shipping
Quantity up down  
Product List
Product Info Product Remove
Total(Qty) 0
Checkout
Checkout

 

Overview

The  H&H Electronics Tessen Active models use the same ‘audiophile’ braced plywood cabinets and purpose designed HH drivers as the passive systems, but couple them with dynamic and responsive amplifiers.

  • H&H Electronics TNS-118A - 500W Class D units drive the woofers, active crossovers and subtle equalisation ensure the cabs, amps and drivers are perfectly suited to each other, and outperform expectations.
  • As with all HH systems, Tessen Active cabs don’t feature multiple inputs, gains and EQ’s or any of the other functions best performed by a purpose built mixer, just high quality amplification to make your sound louder without colouration.

A TROUSER FLAPPER

  • Couple a very high efficiency, high specification HH 18” woofer with our high efficiency 500W Class D amp and switch mode supply and you have what we simply call ‘A trouser flapper’.

Technologies:

PA WOOFERS

  • Many aspects must be considered in PA woofer design: Is it for a sub or a front-of-house cab? If front-of-house, what compression driver will it be used with? What size and type of cabinet must it suit? How many drivers will be in the cab? When all this is considered, it is clear why designing and building our own speakers is a great advantage.
  • FOH woofers must have enough high mid to match the compression driver used, but must reproduce enough bass to work without a sub. Subwoofer drivers must be able to shift a lot of air without suffering mechanical damage, or becoming non linear, and also should not reproduce much mid, which would need to be rolled out by expensive X-over components.

TESSEN RANGE SPEAKERS

  • All Tessen systems have cast frame, designed-for-purpose woofers with highly efficient ribbon wire coils, massive magnet structures and glass-fibre reinforced felted cones with long excursion surrounds. Cones are manufactured to our specification by world renowned U-Sonics Power Cone and specially imported for Tessen cabs. The glass fibre reinforcement greatly enhances the stiffness of the cones without compromising weight, and provides the correct tonal character and smoothness to seamlessly blend with the large format 1.4” exit compression drivers used in all Tessen high/mid cabs. The 1.4” exit / 50mm Titanium dome compression drivers give a smoother, clearer upper mid character for superb vocal reproduction with great projection and very high power handling

TOTAL SYSTEM DESIGN

  • Unlike many of our competitors, we design and build every part of our products. Speakers, electronics, cabinets and other parts are all designed and refined together to make a system; every part is fine tuned in development to work in harmony with the others resulting in performance far greater than the sum of the parts

FRONT OF HOUSE

  • The main PA facing the audience is the vital link between your talent and your audiences perception. Your front-of-house cabs carry your message. Loud isn’t enough ; detail, clarity, responsiveness and even subtlety are essential. Your speakers should be good enough that nobody even notices they exist. By fine tuning every detail to work together our PA will put the focus on you, not your speakers. Understated looks with robust build and components sourced from the best suppliers after extensive testing combine to give outstanding acoustic performance.


SUBWOOFERS

  • Subwoofers don’t just ‘add bass’. By extending the low frequency response of your system you increase the natural character of the sound, and improve mid range clarity by removing the need for your Front-of-house cabs to reproduce bass. HH subwoofers are designed to musically add low frequency content that will enhance any source: vocals, acoustic instruments, drums or recorded tracks. By filling in the lower ranges with clean, clear and musical sound the overall performance of your PA will be improved.

ACTIVE SUBWOOFERS

  • A 500W RMS Class D amplifier combined with a switch-mode power supply drive purpose built woofers with ribbon wire coils and large high grade magnet systems to create highly efficient and responsive subwoofer systems. With balanced stereo inputs, filtered and full range link outputs, variable low pass filter and phase reversal switch HH active subs can easily be added and perfectly matched to any system, enhancing any style of music.

CABINET DESIGN

  • Good Engineers realise that you can’t create a perfect design on a computer. After optimising the theoretical cabinet acoustics we build and extensively test samples. During testing braces, handles, pole mount fittings, ports and drivers may all be moved or altered. Sometimes just a few millimetres make a big difference to overall performance. Bracing the cabinet in the right place costs no more than a brace in the wrong place, but greatly improves clarity. A few days of extra testing and cabinet building is justified by the result

Features:

  • Active Dual Format (landscape & portrait) Subwoofer
  • 500W RMS @ 4 ohm Class D amplifier with switch-mode power supply, comprehensive protection circuitry and clip free limiting
  • 40 – 250Hz
  • Left & Right balanced Jack/XLR Combi inputs with full range (link) & Hi-pass filtered XLR outputs
  • Variable low pass filter & phase reversal switch plus Master Volume with clip, power & protect LED’s
  • Rectilinear sub cab with internal bracing. 18mm rebated * Plywood construction
Rear Panel Features:

1.COMBI INPUT - A line level balanced input compatible with balanced and unbalanced XLR and jack signal leads. Note;as this is a balanced input,a stereo signal cannot be connected to this socket.It is also not compatible with microphone level inputs and is not suitable for direct connection to a microphone.Use only good quality shielded signal cables.

2. LINK OUTPUT  - A balanced XLR output, parallel to the input. Use this to pass the signal along to another active cabinet.

3.LINK HI PASS -  A balanced XLR output,parallel to the input but filtered at 100Hz to remove bass.Use this output to connect to an active hi/mid cab,or the power amp for the hi/mid cabs.

4.SUB VOLUME  - Adjusts the overall level available from the subwoofer.

5. LO PASS  - Adjusts the upper frequency limit of the sub from 80Hz (fully anti-clockwise) to 180Hz (fully clockwise). Use this in conjunction with the phase switch to integrate with hi/mid cabs.

6.PHASE -  Pressing this switch reverses the phase of the subwoofer output with respect to the input signal.Depending on other cabinets used in the PA and the size and shape of the room reversing the phase of the sub may reduce 'boom', giving tighter bass.

7.POWER LED  - Illuminates when the unit is connected to the mains supply and switched on.

8.SIGNAL LED -  Illuminates to indicate signal is present at the input.

9. PEAK LED -  Illuminates just before the amplifier begins to clip and distort. Adjust the level control and signal level from your source so this illuminates only briefly on peaks in the music.Using the system with this on all or much of the time will result in poor sound quality and damage to speakers and electronics.

10. PROTECT LED -  This illuminates if a fault condition occurs, such as overheating.The amplifier will shut down to prevent further damage.Normal operation will resume once the fault has been rectified.

11.MAINS INLET -  IEC input for connection of an appropriate mains lead.

12.FUSE  - The main fuse is located at the top of the IEC socket. In case of failure replace only with the type and rating specified on the panel.

13.MAINS SWITCH -  Turns the system on and off.Ensure the volume control is at minimum when switching on and off.

14.VOLTAGE SELECT SWITCH -  This is factory set to the correct voltage for the region the product is supplied to.If necessary it can be reset by removing the mains lead and then loosening (but not removing) the screws securing the cover.The cover can then be pivoted away from the switch which can be moved to select the alternate voltage.DO NOT reconnect the mains lead until the cover is replaced and secured. Please ensure the correct fuse is fitted (as printed on the panel) for the voltage being used.

15.HEATSINK  - This product is convection cooled.Do not cover the heatsink.

Specifications

Cabinet .........................Rectilinear sub cab with internal bracing. 18mm rebated Plywood construction

Cabinet fittings .............Custom recessed low profile HH rubber feet on 2 sides, allowing landscape and portrait format use.

Connections................... Left & Right balanced Jack/XLR Combi inputs with full range (link) & Hi-pass filtered XLR outputs

Controls......................... Variable low pass filter & phase reversal switch plus Master Volume with clip, power & protect LED's

Crossover.......................Active X-over with variable lo-pass frequency

Finish ............................Black spatter paint with routed logos

Frequency Response..... 40 - 250Hz

Grille .............................Custom punch heavy gauge steel wrap around grille with acoustic foam front

Handles..........................4 way routed handles x 2

HF Driver........................ None

Internal Impedance...........4 ohm

Length ............................0.705

Max SPL (calc)................126dB

Pole mount fitting ............35mm steel on 2 sides, allowing landscape and portrait format use.

Power amplifier................500W RMS @ 4 ohm Class D amplifier with switch-mode power supply, comprehensive protection circuitry and clip free limiting

Product Type...................Active Dual Format (landscape & portrait) Subwoofer

Sensitivity (1W@1m).......99dB

Vol .................................0.45576135

Weight ............................47.5Kg

Width ..............................0.653

Woofer .............................HH HE-577L. Cast chassis 18" driver with Glass-fibre reinforced cone, Ribbon wire 125mm voice-coil and 148oz magnet

Dimensions (HxWxD) (mm) .......860 x 565 x 605mm (33.9 x 22.2 x 23.8 inch)

Packed Volume......................... 0.442m3 (15.63 cu. Ft)

Product Details
Product Name TNS 118A
Brand H&H ELECTRONICS
Sale Price Php 72,020.00
Mileage Points :720.20
수량 수량증가수량감소
Product Code P0000IBV
Product Details 18-inch Active Subwoofer (1 pc)
QR Code
qrcode
Save as imageCopy URL codeSend to Twitter

Payment

Shipping

  • Shipping Method : Selected by customer
  • Shipping Area : Nationwide, Worldwide
  • Shipping Cost : International Shipping Fee
  • Shipping Time : 2 - 6 days
  • About Shipping :

Returns/Exchanges

Refunds

The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720

Product Inquiry

Product Reviews

Post Your Review See All

There are no posts to show

상품 Q&A

Product Inquiry See All

There are no posts to show

Seller Info

Related Items


WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close
Top