Overview:

A two-way system featuring 15“/1.4“ speakers, the DB TECHNOLOGIES  DVX D15 HP is the enclosure of choice for use as a fullrange FOH speaker or a powerful drum monitor.It delivers punchy, assertive bass response without requiring an added subwoofer. Its integrated, high-performance digipro G2 digital power amp delivers very high sound pressure levels, exceedingly dynamic response, and tight, clean low-end response.Loaded with high quality speakers, it provides premium audio performance with maximum reliability and minimum power compression.

Features:

• Active Speaker 1400 Watt
• The onboard controller even provides a special monitor setup that specifically adapts the enclosure’s performance for use as a monitor.
• It also serves as a controller for an active equalizer, x-over, limiter, and phase and delay time alignment.
• The DVX D15 HP is the perfect match for DVA Series subwoofers
• A 1.4” driver with a 2,5” voice coil designed to handle highest loads renders vocals with a powerful, assertive punch, easily throwing signals across medium-to-longer distances.
• The housing’s multifunctional design incorporates rigging points and a slanted panel serving monitoring purposes.

Rear Panel Features:

COMMANDS AND FUNCTIONS

1) “BALANCED INPUT” CONNECTOR - These balanced inputs can be used to connect balanced or unbalanced microphones or audio sources at line level (0dB) (eg. preamplifier, mixer, recorder, CD player, musical instrument, ...).

2) “LINK” - “INPUT-LINK” CONNECTORS - The balanced connector is connected in and can be used to send the audio signal to other amplified speakers, recorders or supplementary amplifiers.

3) “LIMITER” INDICATOR LIGHT - This indicator shows red to indicate that the internal limiter circuit has tripped. This prevents amplifier distortion and protects the speakers against overloads.

4) “SIGNAL” INDICATOR LIGHT - This indicator shows green to indicate the presence of the audio signal (at a level of - 20dB).

5) “READY” INDICATOR LIGHT - This indicator shows green to indicate that the main power voltage is correct. The LED shows green normal operating conditions

6) “SENSITIVITY” INPUT SENSITIVITY CONTROL - This control adjusts the sensitivity of the signal amplifier input. This control does not affect the “LINK” - “INPUT - LINK” output level.

7) “MODE” SWITCH -This two-way switch allows to choose between two different system presets. The “FULL RANGE” position allows linear response of the speaker, which is mainly

suitable for the “live” application.

8) “INPUT SENS” SWITCH - Position the switch in LINE to use a line level source (0 dB) or MIC to use a microphone.

9) FUSE CARRIER “FUSE” - Mains protection fuse housing. The fuse specifications are found in the data plate of the apparatus. In case of failure to replace it with one of the same type and value specified.

10) "MAINS INPUT" POWER SOCKET - To connecting the power cable provided. The connector used for mains connection is a POWER CON® (blue) socket

11) “MAINS LINK” OUTPUT POWER SOCKET - To linking the mains power. The output is connected in parallel with input (10) and can be used to power another active speaker. The connector is a POWER CON® (grey) socket

HORN ANGLE COVERED:

Specifications: