Overview:
Portable, 24-bit Alesis DSP, EQ and 1000 Watts of Pure Power
for Any Gig
The ALTO EMPIRE RMX1008DFX is a 1000W powered cabinet mixer with
effects and EQ and is part of the EMPIRE RMX cabinet mixer line which includes
the RMX2408DFX (2000W), , RMX1508DFX (1500W), and RMX508DFX (500W) models.
- The ALTO RMX1008DFX includes everything you need to tackle
virtually any live performance. It all starts with an ultra-clean 1000 watts of
Class D power to drive your speakers of choice. Class D amplification makes the
RMX1008DFX not only powerful but incredibly light compared to other solutions
so you won't break your back bringing it to the venue. Running the RMX1008DFX
in stereo will deliver a continuous 2 x 500W at 4-ohms of pure, clean power.
We didn't stop at just delivering clean power for this
powerhouse cabinet mixer. The RMX1008DFX also features an incredibly useful
array of tools that can make your events world-class. RMX1008DFX includes 18 total inputs including 8 XLR
jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether
you're plugging in guitars, mics, keyboards or even an iPod for playback
between sets, you're covered with the RMX1008DFX .
- Once everything is connected, there's a full on-board
digital effects processor and 3-shelf EQ on each mono and stereo channel so you
can dial in the perfect sound at any venue.
- A 24-bit, built-in Alesis DSP
effects engine supplies ample options for sweetening including Hall, Room,
Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms),
Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and
Reverb+Flanger combinations. 256
different Alesis DSP presets provide ample options for any situation. When the
gig is done, inset, molded handles on both ends make it super easy to
transport.
Make the professional choice for a portable cabinet mixer
with the EMPIRE RMX-series.
Features:
- 18 total inputs including 8 XLR jacks with phantom power, 8
line jacks and stereo RCA.
- On-board digital effects processor and 3-shelf EQ on each
mono and stereo channel
- Continuous 2 x 500W power at 4-ohms; 1000W at 8-ohms Bridged
- Class D Power
Specifications:
Mono input channels
- Microphone input: Electronically balanced, discrete input
configuration
- Frequency response: 10Hz to 55kHz, +/–3dB
- Distortion: (THD & N) 0.006% at +4dBu, 1kHz
- Gain: 50dB (MIC)
- SNR: (Signal to Noise Ratio) >90dB
Line input
- Electronically balanced
- Frequency response: 10Hz to 55kHz, +/–3dB
- Distortion: (THD & N) 0.04% at +4dBu, 1kHz
- Gain: 30dB
Stereo input channels
- Line input: Unbalanced
- Frequency response: 10Hz to 55kHz, +/–3dB
- Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Impedances
- Microphone input: 1.4kOhm
- Channel Insert return: 2.5kOhm
- All other inputs: 10kOhm or greater
- Tape out: 1kOhm
- All other output: 120Ohm
Equalization
- Hi shelving: +/–15dB @12kHz
- Mid bell: +/–15dB
@2.5kHz
- Low shelving: +/–15dB @ 80Hz
Alesis DSP Section
- A/D and D/A converters:
24-bit
- DSP resolution: 24-bit
Type of effects
- Hall, Room, Vocal & Plate Reverb
- Mono & Stereo DELAY (max delay time 650ms)
- Chorus, Flanger & Reverb Modulations
- Reverb+Delay, Reverb+Chorus,
- Reverb+Flanger
combinations
- Presets: 256
Controls
- 16-position PRESET Selector; 16-position VARIATION selector
- CLIP LED; MUTE SWITCH with LED indicator
Main Mix Section
- Noise: (Bus Noise) Fader 0 dB, channels muted:–85dBr
(ref.:+4dBu)
- Fader: 0dB, all input channels assigned and set to
- UNITY gain:–71dBr (ref.:+4dBu)
- Max output: +27dBu balanced, +22dBu unbalanced, 1/4"
jacks
- AUX Sends max out: +22dBu
Output Power Stereo mode
- 440W(RMS) @ 4ohm
- 480W(EIAJ) @ 4ohm
- 254W(RMS) @ 8ohm
- 263W(EIAJ) @ 8ohm
- Bridge mode 945W @
8ohm
- Power supply Main voltage: 100-120VAC ~ 60Hz ,220-240VAC ~ 50Hz
- Fuse: 100~120V: T8A 250V ,220~240V:T5A 250V
- Dimensions :(WxLxH): 550mm x 220mm x 210mm
- Weight: 17.63 lb