PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Price | |
---|---|
Discounted Price | Php 29,766.00 |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
Points :297.66(1.00%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Selected by customer |
Shipping Cost | International Shipping Fee |
Description |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
Overview:
If you need superior stereo sound for small club gigs, churches or speeches, but have to keep the outboard gear to a minimum, the 12-channel PMP1000 can deliver. The 500-Watt mixer has built-in mic preamps and an FX processor, as well as enough power to drive both mains and monitors thanks to dual 250-Watt onboard power amps.
Massive Mono or Stunning Stereo
Classic Control, State-of-the-Art Sound
Built-in Digital Effects Processor
Changing the Channels
The Ins and Outs
Optimized Output
Small, Simple, Superb
Product Features:
Front Panel Features:
MONO AND STEREO CHANNELS
1.) Use the GAIN control to adjust the input gain.
2.) The LEVEL SET LED illuminates when an optimum operating level has been adjusted.
3.) The mono channels are equipped with a high-slope LOW CUT filter eliminating unwanted low-frequency signals like rumble noise.
4.) PMP4000 / PMP6000 (stereo channels): Press A/B button to switch from 1/4" jacks to RCA connectors and vice versa.
6.) Use the MID control to boost or cut the midrange frequencies.
8.) The LOW control allows you to boost /cut low frequency range.
9.) With the Monitor control you can adjust the volume of each channel in the monitor mix.
11.) The FX control determines the signal level sent from each channel to the built-in effects processor,this signal is also present at the FX SEND jack.
13.) The PANORAMA control determines the position of the channel signal in the stereo main mix.
14) The BALANCE control for the stereo channels corresponds to the PAN control for the mono channels.
16.)The MUTE switch mutes the channel in the main mix.
17.) The channel fader control the channel signal level in the main mix.
INPUT SECTION:
18) Each mono input channel is equipped with a balanced microphone input (XLR connector) which provides +48V phantom power for condenser microphones at the touch of a button
19.) Each mono input features one LINE IN connector ,which can be used with either balanced or unbalanced signals.
20.) INSERT I/O : Insert points or simply inserts are used to process a signal with dynamic processors or equalizers.
21.) The stereo channels have a gain control for gain adjustment,with the input sensitivity ranging from +20 to -20 dB.
22.) Each stereo channel has two line-level inputs (1/4" jacks) for the left and right channels.
26.) The Phantom power supply provides the voltage necessary for the operation of condenser microphones
27) The AMP MODE switch determines the mode of operation of the PMP amplifier stage. (MAIN,MON,BRIDGE)
29.) PMP1000 / PMP 6000 :lf STANDBY is pressed,all input channels are muted.
EQUALIZER AND FBQ
30.) Your power mixer features a graphic 7-band equalizer,which allows you to fine-tune the sound depending on the room acoustics.
31.) Press the FBQ IN switch to activate the Feedback Detection System.
32.) Use the MAIN/MON 1 switch to select whether the equalizer processes the main or the monitor mix.
33.) Press the EQ IN switch to activate the equalizer.The fader LEDs illuminates when the EQ is on.
34) Use this LED display to control the output level of the main signal
EFFECTS SECTION
35.) List of all multi-effects processor presets
36.) The LED level meter on the effects module should always show a sufficiently high level.
37.) The effects display always reads the currently selected preset.
39.) PMP1000/PMP4000 : Turn the PROGRAM control to select an effects algorithm .
40) PMP 1000 : The FX TO MON control performs the same function as on the PMP4000 and PMP6000
41) The FX 1/2 TO MON 2 control allows you to determine the effect intensity of the multi-effects processor in the monitor 2 mix.
42) The FX 1/2 TO MAIN control allows you to determine the effect intensity of the multi-effects processor in the main mix.
MAIN AND MONITOR SECTION
43) The surround control determines the effect intensity.
44) Press the XPQ TO MAIN switch to activate this effect
46) FX SEND fader
47.) MON SEND fader
48.) The main mix allows you to control the volume from the MAIN 1 output with both faders
52) The PHONS/CTRL R control adjusts the headphone or control room volume
54) With the CD/TAPE RET fader you can adjust the line signal applied to the CD/TAPE input
CONNECTORS
55) Use the CD/TAPE INPUT jacks (RCA) to connect an external stereo signal,such as a CD player,tape deck or other line-level sources
56.) The voice canceller filters vocal-specific frequencies from the CD/TAPE INPUT signal
57.) The CD/TAPE OUTPUT provides the line level stereo signal
58.) The MAIN OUT jacks allow you to send the main line level signal to an external amplifier,when for example you want to use the mixer and effects section
60.) Connect your monitor power amps or active monitor speakers to the MON 1/2 SEND to monitor the signal mix created with the MON controls or to route it to the musicians on stage
61.) The PMP series comes with a POWER AMP INSERT connection that is provided for various applications
62.) The FOOTSWITCH jack is for a standard footswitch.
64.) The FX SEND connector can be used to route the FX SEND signal from the input channel for example to the input of an external effects device.
65.) The PHONS / CTRL connector allows you to connect a pair of stereo headphones or an monitor speaker.
Rear Panel Features:
Specifications:
Microphone Inputs
Mono Line Inputs
Stereo Line Inputs
Equalizer
CD/Tape Input
Main Preamp Outputs
Monitor Preamp Outputs
Stereo Outputs
Loudspeaker Outputs
Load Impedance
DSP
Display
Amplifier (Power Amp Output)
Power Supply
Physical/Weight
Expanded Set-up
Product Name | EUROPOWER PMP1000 |
---|---|
Brand | BEHRINGER |
Sale Price | Php 29,766.00 |
Mileage | Points :297.66 |
수량 | |
Product Code | P0000GOV |
Product Details | 12ch Powered Mixer with Multi-FX Processor |
QR Code |
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720