PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Price | |
---|---|
Discounted Price | Php 49,000.00 |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
Points :490.00(1.00%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Selected by customer |
Shipping Cost | International Shipping Fee |
Description |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
Overview:
RCF HPS 1500 is a 2 channel power amplifier that delivers up to 2 x 750 W RMS @ 4 Ω (1500 W RMS bridged @ 8 Ω).
Features:
1.) Channel level control (one per channel).
It is a 41 step control to adjust the output level of the respective amplifier channel.Turn clockwise to increase the output level (0 dB = max. level); turn counterclockwise to decrease.
2.) LED bar (one per channel)
3.) Power LED - When lit, it indicates that the amplifier is switched on and operating.
4.) Bridge LED - When lit, it indicates that the amplifier is set to the ‘bridge’ mode.
5.) Power switch (I = ON; 0 = OFF)
6.) Air intakes with grilles and filters
Rear Panel Features:
7.) Balanced audio input (one per channel, female XLR connector)
8.) Balanced parallel audio output (one per channel, male XLR connector) This output provides a copy of the signal present on the respective channel input and it is useful to link other amplifiers.
9.) Internal limiter on / off switch (one per channel)
10.) Input sensitivity / voltage gain selector (one per channel)
Use this switch to match the amplifier input sensitivity / voltage gain to other connected equipments.
11.) Amplifier mode selector - Before turning the amplifier on, set the amplifier mode selector to the right position among BRIDGE, STEREO and PARA (mono)
12.) Amplifier output to loudspeakers (SPEAKON connector, one per channel)
In stereo and mono modes, both outputs can be connected; in ‘bridge’ mode, connect the output 1 Only
13.) Power cable input - Connect the power cable only to a mains socket outlet with a protective earthing connection
14.) Openings for heated air exit. - Do not obstruct these openings !
Operation Modes:
Ensure the amplifier is switched off, then set the MODE selector to STEREO.
In stereo mode, the 2 channels operate independently and each front panel level control affects the respective output.
Minimum nominal load impedance is: 2 Ω per output (HPS 2500) / 4 Ω per output (HPS 1500).
Loudspeakers can be connected to either the SPEAKON output 1 (left channel) or 2 (right channel).
Ensure the amplifier is switched off, then set the MODE selector to PARA.
In mono mode, both channels are linked to input 1 (therefore receiving the same signal).
Each front panel level control affects the respective output, allowing you to set (if necessary) different levels.
Minimum nominal load impedance is: 2 Ω per output (HPS 2500) / 4 Ω per output (HPS 1500).
Loudspeakers can be connected to either the SPEAKON output 1 or 2.
Ensure the amplifier is switched off, then set the MODE selector to BRIDGE.
In ‘bridge’ mode (mono), both amplifier channels work with the same input signal, but with
inverse phases. The result is a doubling of the output voltage in order to get a double power (on a
double impedance load).
Both level controls (on the front panel) must be set to the same value (it is advisable to set them to the max. level: 0 dB).
Only the input CH1 is to be used; only the amplifier output 1 is to be connected (pay attention to the
SPEAKON pins: 1+ positive, 2+ negative).
Minimum nominal load impedance is: 4 Ω (HPS 2500) / 8 Ω (HPS 1500).
AMPLIFIER SPECIFICATIONS
INPUT SECTION
OUTPUT SECTION
SYSTEM PARAMETERS
POWER REQUIREMENTS
PHYSICAL SPECIFICATIONS
Product Name | HPS 1500 |
---|---|
Brand | RCF |
Sale Price | Php 49,000.00 |
Mileage | Points :490.00 |
수량 | |
Product Code | P0000HXA |
Product Details | Power Amplifier (750W) |
QR Code |
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720