Overview:
The Blackmagic Design HyperDeck Studio Pro 2 is a file-based
deck that features the same functionality and control of professional tape
decks. It records uncompressed video with 4:2:2 color sampling at 10-bit in
.mov format, and also records video using either ProRes or DNxHD codecs. With
two SSD slots, you can record almost endlessly as one SSD becomes full,
recording automatically continues on to the other. The Studio Pro features one
6G-SDI input & output for 4K signals, and three SD/HD/3G-SDI inputs &
outputs. It supports Ultra HD 4K via HDMI. It also features analog component in
& out, with analog audio in & out, and timecode in & out.
The Studio Pro 2 is a 1RU rack mountable unit, with built-in
rack mount ears. It features illuminated front panel button control and a
jog/shuttle wheel for analog scrubbing. RS-422 control is supported for
external control. You can also control the unit using either the USB port or
over ethernet via the RJ45 connector. An integrated LCD on the front panel
allows you to monitor the video, and display timecode and transport
information. The unit also incorporates a Thunderbolt port, for connecting the
HyperDeck Studio Pro 2 to a computer.
Features:
- File-Based Recording - The HypeDeck Studio Pro 2 records to uncompressed Quicktime
at 10-bit with 4:2:2 color sampling. It also records to ProRes 422(HQ), ProRes
422, ProRes 422 (LT), ProRes 422 (Proxy), as well as Avid DNxHD and Avid DNxHD
MXF.
- Two SSD Bays - The Unit incorporates two 2.5" SSD slots, that allow
you to record almost endlessly as recording seamlessly switches from one SSD to
the other as the first one fills up.
- Thunderbolt- The built-in Thunderbolt port allows you to connect the unit
to a computer, and it is independent of the SSD drives. This allows you to
record to an SSD in the unit, while simultaneously feeding a computer via
Thunderbolt. You can also play back from a computer over Thunderbolt into the
unit, and the signal will be available via the SDI or HDMI outputs.
- Video Signals- The HyperDeck Studio Pro 2 supports SD, HD, and 3G signals
over SDI and HDMI. In addition to NTSC and PAL signals, 720 x 480p and 720 x
576p signals are supported over HDMI, while 4K video is supported via 6G-SDI
and HDMI.
- Outputs - All outputs are active at all times, so play back is
available from all outputs simultaneously, no matter what the original input.
This applies to playback from a computer or the SSDs. The exceptions are that
4K output is only available over the 6G-SDI and HDMI connectors, while 480p
& 576p are only available as HDMI output.
- VTR Style Controls - The HyperDeck Studio Pro 2 features VTR style front panel
controls for record and playback. With illuminated buttons, for working in dim
locations or settings, while a built-in jog/shuttle wheel provides analog style
control over your playback.
- Remote - The unit is controllable via RS-422 control and over the
Ethernet or USB port.
- Built-In LCD Monitor - The unit's front panel also features a built-in LCD screen
that allows you to monitor input or playback video as well as timecode, format,
and audio levels.
- Included Software - The HyperDeck Studio Pro 2 includes HyperDeck Utility, Media
Express, Disk Speed test, Blackmagic System Preferences and Blackmagic driver
software.
Connection Diagram
Specifications:
Video Input
Digital
Video
- 3 x SDI (10-bit SD/HD/3G switchable)
- 1 x SDI (10-bit SD/HD/3g/6G Ultra HD switchable)
- 1 x HDMI 1.4 type A (supports Ultra HD 4K)
Analog Video
- 1 x Component YUV (3 x BNC) SD/HD
Video Output
Digital
Video
- 3 x SDI (10-bit SD/HD/3G switchable)
- 1 x SDI (10-bit SD/HD/3G/6G Ultra HD switchable)
- 1 x SDI Monitor Output (10-bit SD/HD/3G switchable)
- 1 x HDMI 1.4 type A (supports Ultra HD 4K)
Analog Video
- 1 x Component YUV (3 x BNC) SD/HD
Audio Input
Analog
- 2 x 3-pin XLR balanced connectors
- 2 x RCA jacks for unbalanced audio
Digital
SDI
- 16 x channels embedded in SD and HD in QuickTime files.
- 2 x channels in Avid DNxHD MXF files
HDMI
- 8 x channels embedded in SD and HD in QuickTime files.
- 2 x channels in Avid DNxHD MXF files.
Audio Output
Analog
- 2 x 3-pin XLR balanced connector
Digital
SDI
- 16 x channels embedded in SD and HD in QuickTime files. 2 x channels
in Avid DNxHD MXF files.
HDMI
- 8 x channels embedded in SD and HD in QuickTime files.
- 2 x channels in Avid DNxHD MXF files.
Computer Interface
- 1 x Thunderbolt (for video/audio)
- 1 x USB 2.0 mini B-type for initial setup, software updates
and HyperDeck Utility software control
SSD Interface ........... 2 x
2.5" SATA 3Gb/s
Sync Input .............Blackburst or Tri-Sync
Device Control.................Sony
compatible RS-422 deck control port
Recorder
- Recorder control:12 buttons and jog wheel for local control /or use either RJ45 Ethernet or USB 2.0 high speed interface
- Recorder configuration:use USB 2.0 high speed interface
Format Support
SD
- NTSC/PAL
- 525 29.97 / 625 25 (525 59.94i / 625 50i)
- 480p60 and 576p50 via HDMI only
HD
- 720p 50/59.94/60
- 1080i 50/59.94/60
- 1080PsF 23.98/24/25/29.97/30
- 1080p 23.98/24/25/29.97/p30
4K
- 3840 x 2160p 23.98/24/25/29.97/30\
SDI Compliance .................SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE
425M
SDI Metadata Support....... HD RP188 and closed captioning
Sampling ...................Video: 4:2:2 Audio: 48kHz/24-bit
Color Precision............10-bit
Color Space
Multiple Rate Support
- SDI and HDMI switchable between SD, HD and Ultra HD
- SDI switches between 270
Mb/s standard definition SDI, 1.5G-SDI HD, 3G-SDI and 6G-SDI
- Analog SD/HD
Copy Protection
- HDMI input is unable to capture from copy protected HDMI sources
- Always
confirm copyright ownership before capture or distribution of content.
Codecs Supported
- Uncompressed QuickTime
- Apple ProRes 422 (HQ) QuickTime
- ProRes 422 QuickTime
- ProRes 422 (LT) QuickTime
- ProRes 422 (Proxy) QuickTime
- Avid DNxHD QuickTime
- Avid DNxHD MXF
Display................. Built-in LCD
for video, audio and timecode monitoring
Rack Size ................1RU / less than 7" deep (approx. less than 18 cm)
Power Supply .............. Built-in international AC power supply with IEC C14 inlet 110-240V, 50-60Hz
Note: AC power cord is not included