1) “VOLUME” CONTROL - The knob regulates the diffuser's volume. This control does not affect the output “LINK” levels.

2) “LIMITER” INDICATOR LIGHT - The “LIMITER” indicator light comes on red during start (for a few seconds) and when the internal audio limiter engages. This avoids the amplifier's distortion and protects the loudspeakers against overloads.

3) SENSITIVITY SWITCH  - Position the switch in LINE to use a line level source (0 dB) or MIC to use a microphone.

4) “READY” INDICATOR LIGHT - The “READY” indicator light comes on green to indicate that the amplifier is switched on and it is working properly.

5) “BALANCED INPUTS LINK” CONNECTORS - These balanced inputs can be used to connect balanced or unbalanced microphones or audio sources at line level (0dB) (eg. preamplifier, mixer, recorder, CD player, musical instrument, ...).The balanced connector is connected in parallel and can be used to send the audio signal to other amplified speakers, recorders or supplementary amplifiers.

6) POWER CABLE SOCKET “MAINS” -  Used for connecting the power cable supplied. /  FUSE CARRIER “FUSE” - Mains fuse housing.

7.) “STEREO CD-AUX” INPUT CONNECTORS – Through the RCA phono connectors, this input permits easy connection of CD,DAT ,cassette players,etc

8.) VOLTAGE SELECTOR

9) POWER SWITCH “POWER” - This switch can be used to switch the diffuser on and off

Specifications: