PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Product Details
KB3
| Price | |
|---|---|
| Discounted Price | Php 23,500.00 |
| Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
| Reward Points |
Points :235.00(1.00%)
|
| Shipping Method | Selected by customer |
| Shipping Cost | International Shipping Fee |
| Description |
| Shipping | |
|---|---|
| Quantity |
|
| Product Info | Product | Remove |
|---|---|---|
| Total(Qty) 0 | ||
Overview
Basically self-contained, compact sound systems, the KB series amps are perfect for voice, keyboards, acoustic and electric guitar, drum machines and backing machines.
Features
- Extension cab capability extends power rating out to 80 watts
- 4 separate channels
- Channels 1 & 2 have 2 band EQ
- Channel 3 has 3 band EQ
- Channels 1 & 2 have 1/4" inputs
- Channel 3 features XLR and 1/4" inputs
- Channel 4 features 1/4" monitor input with level control
- Headphone out with level control
- 12 inch speaker with tweeter
- Effects send/return
- Balanced XLR main out
- 60 watts of clean Peavey power
- Weight Unpacked: 52.47 lb(23.8 kg)
- Weight Packed: 59.97 lb(27.2 kg)
- Width Packed: 24.25"(61.595 cm)
- Height Packed: 25"(63.5 cm)
- Depth Packed: 18.5"(46.99 cm)
Front Panel Features:
(1) Level - Controls the 1/4" jack input level on channels 1 and 2 and the 1/4" jack input and XLR input on channel 3.
(2) Low EQ - An active tone control (shelving type: +/-15 dB) that varies the low frequency range.
(3) Hi EQ - An active tone control (shelving type: ± 15 dB) that varies the hi frequency range.
(4) Mid EQ - An active tone control (peak/notch type: ± 15dB) that varies the mid frequencies. (channel 3)
(5) CH4/Monitor Level - Controls the input level for channel 4. Controls high-impedance microphones or other high-level sources equipped with a 1/4" phone plug.
(6) Headphone Level (KB3 only) - This sets the level to the headphone jack on the rear panel. To avoid damage to your hearing‚ make sure to turn the dial fully counter-clockwise before using headphones. Slowly turn the knob clockwise until a comfortable listening level is set. This does not affect the master level.
(7) Master Level (KB3 only) – This knob sets the overall level for the unit
(8) Power Switch – This two-way rocker switch applies power to the unit when placed in the ON position
Rear Panel Features:
(9) Main Line Out- This low-noise‚ electronically-balanced XLR connector can be used to route signals to a mixing console‚ recording device‚ etc.
(10 & 11) Send/Return Jacks Mains - This pair of 1/4" jacks allow the use of various auxiliary units (effects units‚ equalizers‚ etc.) in-line‚before the power amp section.
(12) Headphone Jack - This 1/4" jack accepts stereo headphones only. CH4/Monitor Input Jack (13) Use this 1/4" jack to connect to the output of any line-level device.
(14) Channel: 3 Low-Impedance Input - For use with low-impedance microphones or other line-level sources equipped with a male XLR connector.
(15) Channels 3‚ 2 & 1 - These 1/4" jacks accept high-impedance microphones or line-level sources equipped with 1⁄4" phone plugs.
(16) External Speaker Jack (KB3 only) - This 1/4" jack provides the powered signal from the amplifier. Use this jack to add a second speaker cabinet in parallel. The external minimum speaker load impedance is 8 ohms.
(17) IEC connector/detachable line cord - This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton. The mains cord should be connected to the amplifier before connecting to a suitable AC outlet.
U.S. Domestic AC Mains Cord
The mains cord supplied with the unit is heavy-duty‚ 3-conductor type with a conventional 120 VAC plug with ground pin. Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin‚ a suitable grounding adapter should be used and the third wire should be properly grounded.
Specifications:
PREAMP SECTION
The following preamp specs are measured @ 1 kHz‚ nominal signal levels are with channel level controls set at 5‚ minimum levels are with channel level controls set at 10.
Channel 1 & 2 Inputs:
- Input Impedance:............. 100k
- Nominal Input Level:.......... 6 dBV‚ 2 V RMS
- Minimum Input Level:............. -10 dBV‚ 316 mV RMS
Channel 3 Input:
- Low Z Input Impedance: ...........10k Ohms
- Nominal Input Level:.............. -15 dBV‚ 178 mV RMS
- Minimum Input Level: .............-33 dBV‚ 22 mV RMS
- High Z Input Impedance...............: 75k
- Nominal Input Level:................ -15 dBV‚ 178 mV RMS
- Minimum Input Level:.................... -33 dBV‚ 22 mV RMS
Channel 4 Input:
- Input Impedance:................... 10k Ohms
- Nominal Input Level:............... 0 dBV‚ 1 V RMS
- Minimum Input Level:.................. -25 dBV‚ 56 mV RMS
Headphone Output
- Load Impedance: ...............8 Ohms or greater
- Nominal Output: ......................100 mW RMS
Main Line Out
- Output Impedance:................ <100
- Output Level:......................... 18 dBV
POWER AMPLIFIER SECTION
Rated Power & Load:
- 80 W RMS/4 Ohms or 60 W RMS/8 Ohms (1 kHz, 1% THD @ 120 VAC line)
Frequency Response:
- +0, -1 dB, 20Hz–20 kHz @ 30 W RMS/8 Ohms
DDT Dynamic Range:
- Greater than 20 dB
DDT Maximum THD:
- Below 0.5% THD for 6 dB overload
- Below 1% THD for 20 dB overload
Hum & Noise:
- Greater than 100 dB below rated power
Power Consumption:
- 120 W @ 120V AC‚ 50/60 Hz‚ Domestic
- 120 W @ 220–230/240V AC‚ 60 Hz‚ Export
| Product Name | KB3 |
|---|---|
| Brand | PEAVEY |
| Sale Price | Php 23,500.00 |
| Mileage | Points :235.00 |
| 수량 |   |
| Product Code | P0000CHF |
| Product Details | 1x12-inch Keyboard Amplifier (60W) |
| QR Code |    |
Payment
Shipping
- Shipping Method : Selected by customer
- Shipping Area : Nationwide, Worldwide
- Shipping Cost : International Shipping Fee
- Shipping Time : 2 - 6 days
- About Shipping :
Returns/Exchanges
Refunds
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720
