PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Price | |
---|---|
Discounted Price | Php 183,500.00 |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
Points :1,835.00(1.00%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Selected by customer |
Shipping Cost | International Shipping Fee |
Description |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
Overview:
The K-array Redline KMT12 is much more than a standard 12” powered subwoofer. The amplifier mounted on board is class D, delivering 2 x 1000 W at 8Ω. One of the two amplifying channels is dedicated to an output Speakon to connect to many kinds of speaker configurations, including single mid-high modules (KK52, KK102), multiple line arrays, or the passive version of an additional bass module (KMT12P or KMT18P).
Key Features:
Applications:
The amplifier module and any audio equipment connected to it (mixing consoles, processors, etc.) must beproperly connected to the AC power distribution, preserving AC line polarity. All grounding points should beconnected to a single node or common point, using the same cable gauge as the neutral and line cables. Badgrounding connections within an audio system can produce noise, hum and/or serious damage to the input/ output stages in the system’s electronic equipment.
Rear Panel Features:
The KMT12 and KMT18’s switching power supply accommodates AC mains operating at either 115V or 230V. The KMT amplifiers will continue to operate safely, without interruption, provided the AC voltage remains within 90 - 135V or 190 - 250V (230V), at 50 or 60 Hz. Please verify that your AC mains connection is capable of satisfying the power ratings for the device.
1) CH1 Line Input. XLR line level input with +4 dBu sensitivity.
2) CH2 Mic/Line Input. XLR input, with selectable sensitivity for Mic (-30 dBu) or Line (+4 dBu).
3) CH1 Parallel Line Out. XLR parallel output, providing a direct signal from the CH1 Line Input. This output cannot be processed or controlled via the K-Framework software.
4) Phantom Power switch. Turns phantom power (48V) on/off on CH1 and CH2 inputs.
5) Mic/Line switch. Selects CH2 input sensitivity for Mic ( -30 dBu) or Line ( +4 dBu) level.
6) Limiting LEDs. Independent LEDs for the CH1 and CH2 inputs, which blink when the optical limiter engages toprotect the corresponding preamp circuit. Limiter threshold is +5 dBu.
7) DSP Out. Auxiliary XLR balanced output, controlled via the K-Framework software. Users can select the signalrouted to this output and manage its amplitude and EQ individually.
8) DSP Out Power switch. Turns phantom power (48V) on and off on the DSP out. Phantom power can be engaged to drive additional wireless signal transmitters/receivers.
9) AES/EBU Digital Input. XLR input connector for two-channel AES/EBU digital audio, accepting sample ratesfrom 32 kHz – 96 kHz.
10) AES/EBU Digital Output. XLR output, providing two-channel digital audio from AES/EBU Input, at a sample rate of 48 kHz. This output cannot be processed or controlled via the K-Framework software.
11) REMOTE RS485 Link Input. XLR input for connecting the KMT from another RS485 device in a K-Frameworknetwork. RS485 Link Input can also be used to connect a computer running the K-Framework software (requires K-USB USB-to-RS485 adapter).
12) REMOTE RS485 Link Output. XLR output for connecting additional RS485 devices in a K-Framework network.
13) REMOTE USB Input. Connects a computer running the K-Framework software, for remote control of the KMT.Users can manage an entire network of RS485 devices with one PC connected via USB (see RS485 Networkdiagram, below).
14) Speaker Out. Powered Speakon output, used to drive passive speakers, like a KP series mid-high module or a KMT series passive subwoofer
15) Power switch. Turns the KMT system on and off.
16) AC Input. Powercon input for AC power. See p. 11 for voltage and power requirements.
17) AC Link. Powercon ouput for feeding AC mains power to additional K-array components with a powercon ACinput socket.
18) Extension Connector. Multi-pin connector for various K-array extension modules, for wireless control and audio transmission, memory extension, digital signal encoding and audio reproduction.
19) Power On LED. Indicates the system is ON.
20) TOUCH SCREEN Control panel. Provides access to the main functions of the DSP on board
Touch Screen Function:
Physical Dimension:
Product Name | KMT12 |
---|---|
Brand | K-ARRAY |
Sale Price | Php 183,500.00 |
Mileage | Points :1,835.00 |
수량 | |
Product Code | P0000GAZ |
Product Details | 12-inch High Tech Powered Subwoofer with DSP and Power Output (1 pc) |
QR Code |
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720