Overview:
The McLelland MCR-61 6 channel microphone/source mixer which
allows to mix up to 3 microphone inputs and 3 line inputs together, each input
channel has a rotary volume control and tone control. This unit could also
offer 12V phantom power to your microphones. Offering high quality sound, the
McLelland MCR-61 will be the best solution for Karaoke, Restaurants, Hotels,
and so on.
Features:
- 19” single rack mount microphone and source mixer
- 6 channels total inputs
- 3 channels XLR & 3 channels stereo RCA input
- Left & Right 1/4” TRS mian out
- FX Loop: 1/4” Left & Right RETURN and SEND jacks
- 12V phantom power
Front Panel Features:
- Mic 1~3: Adjust the volume of input from the Mic/Line Inputs.
- CLIP LED: Indicates overload in the channel. The LED lights 3 dB below clipping.
- TONE: 1 3: Adjust the frequency content of the signal in the channel clockwise increase the higher frequencies or Treble portion of the signal, turning the control counterclockwise increases the Bass portion.
- Source 1 4: Adjust the volume of input from the RCA Source Inputs.
- FX In/Out Switch: Engages the signal through the FX loop jacks.
- FX Level: Adjusts the amount of signal from the FX Return jack.
- Bass: Adjusts the low frequencies of the Mic signals.
- Treble: Adjusts the high frequencies of the Mic signals.
- Master Volume: Adjusts the overall level from the main outputs.
Rear Panel Features:
- Mic 1 3: XLR inputs for dynamic or condenser microphones, or
balanced line level signals.
- Mic/Line Switch: Pads the XLR Mic input by 30 dB when in.
- DIP SWITCH: contains the jumpers for engaging Mic 1 3
phantom power, the talkover functions, and the Mono/Stereo select.
- MIC INSERT: 1/4 TRS insert jack for adding external
processing to the Mic signals. Tip=send, ring=return.
- SOURCE INPUTS: Stereo RCA jacks, Channels 1 4, for
connection to stereo sources such as AM/FM tuners, cassette players, CD players, or video
players.
- RECORD OUT: Stereo RCA jacks, contains all mixed signals
before the Remote Volume jacks.
- REMOTE VOLUME: 1/4 TS jack for connection to a remote
potentiometer for master volume control, 20 K Ohm audio taper potentiometer is
recommended.
- Phantom Power Jumpers: Connects the phantom power to the
indicated Microphone input.
- FX Send: 1/4 unbalanced jack for connection to an external
effects device.
- FX Return Right and Left: 1/4 unbalanced jacks for
connection to the external effects output(s).
- Source 1~3: RCA inputs for connection to stereo sources such
as cassette players, CD players, etc.
- MAIN OUTPUTS: 1/4 TRS balanced Right and Left Outputs.
Sample Set-up (Drawing Figure)
Specifications:
- Input Impedance: 600 Ohm(Mic XLR), 22K Ohm(RCA Bus input)
- FX Loop Impedance: 22K Ohm(1/4” TRS Unbalanced)
- Max. Input Level: +20 dBV(Mic), 24 dBV(Line)
- Max. Gain: 60 dB(Mic), 26 dB(Line)
- Tone Control: 12 dB Treble/Bass Cut
- Max. Output Level: +17 dBV
- Output Impedance: 51 Ohm
- Phantom Power Supply: 12V
- S/N Ratio: 96 dB
- THD: < 0.025%
- Dimension: 436 mm(W) x 123 mm(D) x 42.8 mm(H)
- Weight: 2.2 kg