Overview

Designed for concert level and touring PA system - low output gain stage provides unprecedented gain before feedback in monitors.

The AUDIX  OM7 is used by professional sound companies, front of house and mixing engineers as well as high profile fixed installations. The OM7 provides unprecedented gain before feedback on concert level stages without sacrificing sound quality.

• In addition, the mic is very resistant to feedback on extremely loud stages and for performers who tend to “cup” the microphone with both hands.
• In order to achieve these extraordinary performance benefits, the OM7 is designed with an unconventionally low output level (8-10 dB lower than typical dynamic microphones).
• This low output level acts as a natural “pad” at the capsule in order to maintain high fidelity at the source. The OM7 is best suited for use with high quality mixing consoles which have plenty of head room to compensate for the low gain.

Features

• Studio quality sound
• Low gain stage acts as natural pad
• Unprecedented gain before feedback
• Handles high SPL without distortion
• Low handling noise
• Provides exceptional vocal isolation on stage
• Dent resistant steel spring grill

• Lead or backing vocals
• Live recording
• Broadcast
• Home studio - vocal and instrument
• Sax, brass, guitar, dobro, flute, percussion, drums

What’s in the Box?

• Heavy duty nylon mic clip (MC1)
• Carrying pouch (P1)

Specifications:

• Transducer Type..................Dynamic
• Frequency Response...........48 Hz - 19 kHz
• Polar Pattern........................Hypercardioid
• Output Impedance ..............150 ohms
• Sensitivity........................... 0.8 mV / Pa @ 1k
• Capsule Technology...........VLM Type C
• Off Axis Rejection.............. > 30 dB
• Maximum SPL ...................≥144 dB
• Power Requirements ..........None
• Connector..........................Switchcraft® or Audix male XLR connector
• Polarity ............................Positive pressure on diaphragm  produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing / Finish ...............Zinc Alloy / Black E-coat
• Weight ............................307 g / 10.8 ounces
• Length.............................. 176 mm / 6.9 inches