PEAVEY PVXP 10
10-inch Active Speaker (1pc)
Overview
The
PVXp™10 is a two-way sound reinforcement system based on a heavy-duty Pro 10
10" woofer and a RX™10N dynamic compression driver mounted on a 100 by 60
degree coverage constant directivity horn It's sleek modern appearance coupled
with excellent performance offer an outstanding package.
- The
lightweight yet rugged injection-molded plastic enclosure with molded-in stand
mount cup facilitates portable use for live music or PA sound. The trapezoidal
cabinet has two handles for ease of portability, and an extra 45-degree angled
section on the right side to allow use as a floor monitor. Four sets of
flying/mounting points, two on the top, and two on the bottom, with a total of
10 cabinet inserts, provide for the ultimate in installation flexibility. A black
powder coated perforated steel grille provides driver protection and a
professional appearance.
- The
heavy-duty 10" woofer provides a good strong low end for such a compact
enclosure. The RX™10N compression driver tweeter is coupled to a constant directivity
horn with smooth, even response, low distortion and good high frequency
dispersion. This horn has an asymmetrical vertical polar response, aiming the
main energy lobe down 10 degrees, so it is aimed at the audience, instead of
over their heads. The vertical polar pattern is +25 degrees, -35 degrees. This
helps reduce ceiling reflections for greater clarity and gain before feedback.
- The
PVXp™10 speaker system power amplifiers providing the bi-amplification are
low-distortion ultra-reliable fan-cooled. The power supply for both amps is a
switch mode type for low weight and high efficiency. Both amplifiers feature
our DDT™ compression, which virtually eliminates audible power amplifier
clipping. Cooling is provided via a low-noise fan, for reliable operation under
any conditions. Input is via a combo female XLR and 1/4" TRS phone jack
with balanced input to the preamp/EQ electronics, and a level control. A Thru
output has an XLR and a TRS 1/4" phone jack connector. These outputs allow
linking of additional speaker systems, or feed of the signal to a powered
subwoofer, etc.
- The
cabinet of the PVXp™10 speaker system has multiple mounting fly points,
providing outstanding versatility in permanent install use. Two pairs of M10
inserts are molded-in on the top and bottom, and a set of four M8 inserts is
available on the top and bottom, in the pattern used for the Peavey VM70
mounting bracket. This is a total of 12 mounting inserts in all. All of these
inserts have retaining hardware on the inside of the plastic cabinet, providing
a more reliable and safe mode of mounting the cabinet.
Features
- 10"
Heavy-duty woofer
- Ultra-reliable
fan-cooled power amps with DDT
- Patented
Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage
- Asymmetrical
horn aims the sound down to 10 degrees, at the audience, not over their heads
- 400
watts peak available power
- Thru
output is via an XLR and 1/4" TRS phone jack
- Durable
plastic injection-molded trapezoidal enclosure
- Full
coverage heavy-duty perforated steel grilles, with powder coat finish
- Pole
mount molded-in for 1 3/8" diameter poles
- RX™
10N compression driver, with 1" diaphragm
- Top
and bottom flying point inserts
- Input
is via a combo female XLR and 1/4" TRS phone jack with balanced input
- Two-way
bi-amped sound reinforcement enclosure
- Extra
angled section on right side allows floor monitor use
- Weight
Packed: 35.27 lb(16 kg)
- Width
Packed: 16.142"(41.00068 cm)
- Height
Packed: 22.44"(56.9976 cm)
- Depth
Packed: 14.174"(36.00196 cm)