PX10

1000W 8ohms Stereo Power Amplifier

Overview

The Yamaha PX10 Stereo Power Amplifier delivers 1000W at 8 Ohms in a lightweight chassis and is suitable for a wide variety of sound-reinforcement applications. Part of the company's PX Series of power amplifiers, it features a Class-D engine with a single custom LSI chip, and uses PLL technology for higher efficiency and lower noise. The on-board DSP functions include a PEQ, a delay, a crossover, and a limiter. They allow for detailed configuration of parameters such as input & output routing, input sensitivity, amp gain, and speaker impedance. The D-Control multi-band dynamic processor delivers a clear and consistent sound at any output level by shaping the frequency response of each speaker for either front-of-house or monitor configurations. The Configuration Wizard helps save time during setup by assigning optimized speaker settings that match your system configuration. It can be used in basic mode for quick setup or advanced mode for more precise control over DSP parameters. You can store up to eight presets, which can be saved to a USB drive for use with other amplifiers and setups. For secure operation, the panel-locking function ensures that your settings remain safe. With its sturdy frame and carrying handle, the PX10 is built to withstand extended road use.

Features

• Class-D amplifier engine with single custom LSI chip and PLL technology

• Configuration Wizard allows for configuration of the system by assigning optimized speaker settings which can be saved as presets

• Digital routing of inputs & output (dual, parallel, single & SUM)

• DSP functions include PEQ, crossover, filters, delay & limiter, accessed via an LCD display

• D-Contour multi-band dynamic processing shapes the frequency response of speakers for specific applications

• Basic mode for quick setup and Advanced mode for more precise control

• Flexible connectivity with XLR & 1/4" TRS inputs and binding post, SpeakON & 1/4" TS outputs

• Presets can be saved to USB drive for use with other amplifiers and setups

• Panel-locking function to keep settings safe

• Two 16-step variable-speed fans

• Lightweight chassis

Specifications

Number of Channels2

Power Rating8 Ohms:

1000 W per Channel

4 Ohms:

1200 W per Channel

2 Ohms:

700 W per Channel

Amplifier ClassClass-D

Performance

Frequency Response20 Hz to 20 kHz ±1 dB (at 1 W, 8 Ohms)

Input Impedance10 Kilohms (Unbalanced) 

20 Kilohms (Balanced) 

Max Gain37.3 dB (at 8 Ohms)

Max Input Level+24 dBu

SNR101 dB

THD+N0.1% (1 kHz, at 10 W) 

0.3% (1 kHz, at 1/2 Power) 

Crosstalk<-60 dB 

Signal Processing

Sample Rate48 kHz

AD/DA ConversionA/D: 24-Bit, 128 x Over-Sampling

D/A: 24-Bit, 128 x Over-Sampling

Latency1.5 ms

Audio DelayAdjustable Up to 74 ms

EQ6-Band Parametric EQ 

FiltersHigh-Pass:

20 Hz to 20 kHz  

Low-Pass:

20 Hz to 20 kHz  

LimitingYes

Connectivity

I/O2 x XLR 3-Pin Input

2 x 1/4" TRS Input

2 x speakON NL4 Output

2 x Binding Post Pair Output

2 x 1/4" TS Output

USB1 x USB Type-A (USB 2.0)

Power

AC Input Power120 VAC, 60 Hz 

Power Consumption4 Ohms:

310 W (1/8 Power) 

60 W (Idle) 

Physical

Cooling2 x Fan (Variable Speed)

Operating Temperature32 to 104°F / 0 to 40°C

Storage Temperature-4 to 140°F / -20 to 60°C

Dimensions18.9 x 3.5 x 15.2"

480.0 x 88.0 x 387.4 mm

Weight16.3 lb / 7.4 kg

Packaging Info

Package Weight20.5 lb

Box Dimensions (LxWxH)21.75 x 21.75 x 7.5"

What’s in the Box

- PX10

- AC Power Cord

- USB Cap