10 Inches Two Lids, Rubber Foot Racks with Lids/Rubber Foot

R10UE

Overview

This is the EWI Tourcase tm Model R10UE-10 rack case which has a 10" rack depth measured from the front rack rails to the rear rack rails.  The rails are 10U (17.5") in height and are drilled and tapped for standard #10 x 32 racking screws.  This rack is suitable for shallow depth, 19" wide rack gear.

The R10UE-10 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish.  The extrusion is all aluminum and the case is assembled with quality aluminum rivets.  The rivets on the 2 recessed padded flip handles are backed with washers to ensure strength and durability.  Mounted on the bottom of the case are 4 solid rubberized feet.

The case is equipped with two removable lids.  Each lid has four heavy duty ball corners and the inside of the RUE series lids are fully padded with medium density foam rubber.  The lids are secured to the case using 2 medium sized recessed butterfly latches.  Either lid will fit on either side of the case, right-side up or upside down.

These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of racking applications.

Features

• Designed for standard 19" rack mount equipment

• 10U (17.5") rack height

• 10" Front rail to back rail rack depth

• Tough 3/8" plywood and ABS laminate panels

• Recessed butterfly latches and padded flip handles

• Steel ball corners

• #10 x 32 rack rails both front and back

• Chrome plated hardware

Applications

• Road rack for amplifiers or effects

Specifications

• Type:  2 lid road case

• Outside dimensions

• Left to right: 21 5/16" measured at ball corners

• Front to back:  19" measured at ball corners

• Height:  20 1/8" measured on rubber feet

• Color:  Black

• Actual weight: 

• Lids attached:  37 lbs.

• Lids removed:  18 lbs.

• Shipping weight:  45 lbs.

• Dimensional shipping weight: 62 lbs.