PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Price | FOR INQUIRY |
---|---|
Discounted Price | |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
Points :1,149.99(1.00%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Selected by customer |
Shipping Cost | International Shipping Fee |
Description |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
Overview
Four selected KT88 power valves form the backbone of this SERIES ONE 200 Guitar Amplifier Head 200W high gain power house and provide unbelievable dynamics and head-room. The DPR control allows the power to be reduced down to 20W for beautiful power amp distortion at a much lower volume level. Setting new standards in tonal flexibility, the deceptively simple preamp section has four world-beating channels (6 modes) which are further augmented by dual ISF controls.
200 watt, 4x ECC83, 1xECC82, 4xKT88 - 200 Watt head using KT88 valves
ISF Control - Everything from USA to UK
DPR Control Reduce the power, not the damping
MIDI Switching - Control channel selection
Speaker Emulated Output - State-of-the-art speaker emulator
Solid Construction - High quality PCB, Cabinet and Chassis
Series Effects Loop - Connect effects pedals
Features:
1.) Input - Plug your guitar here. Always use a good quality screened guitar lead
Clean Channel
2.) Clean Indicator - When the green LED is on the Clean channel is selected
3.) Clean Select - Press this switch to select the Clean Channel
4.) Clean Gain - The Clean Gain control adjusts the amount of the clean channel's overdrive or distortion. Low settings, counter clockwise, will deliver a clean sound. As the clean gain control is increased clockwise the sound will begin to break up, delivering a subtle overdrive
5.) Bright / Warm Switch - The Bright / Warm Switch reconfigures both preamplifier and power amplifier circuits to deliver class A or Class AB style tones
6.) Clean Volume - This controls the volume of the clean channel. Turning it clockwise increases the volume
Crunch Channel
7.) Crunch Indicator - When the yellow LED is on the Crunch Channel is selected
8.) Crunch Select - Press this switch to select the crunch channel
9.) Crunch Gain - control adjusts the amount of the crunch channel's overdrive or distortion
10.) Super Crunch Switch - allows the selection between a lower gain crunch with a looser bass response (super crunch - out) and a higher gain crunch setting (super crunch - in) , which has a tighter bottom end for modern rhythm playing
11.) Crunch Volume - control the volume of the crunch channel. Turning it clockwise increases the volume
Clean and Crunch channel EQ
12.) Bass Control - adjusts the amount of low-end frequencies in your tone.
13.) Middle Control - adjusts the amount of middle frequencies in your tone
14.) Treble Control - allows exact adjustment of the treble frequencies within the sound.
15.) ISF (Infinite Shape Feature) - The patented ISF control works in conjunction with the Bass, Middle and Treble controls
Overdrive 1 Channel
16.) Overdrive 1 Channel Indicator - When the orange LED is on, the Overdrive 1 channel is selected
17.) Overdrive 1 Select - Press this switch to select the Overdrive 1 Channel
18.) Overdrive 1 Gain Control - adjusts the amount of the Overdrive 1 channel's overdrive or distortion.
19.) Overdrive 1 Volume - control the volume of the overdrive 1 channel. Turning it clockwise increases the volume
Overdrive 2 Channel
20.) Overdrive 2 Indicator - When the red LED is on, the Overdrive 2 channel is selected
21.) Overdrive 2 Select - Press this switch to select the overdrive 2 channel
22.) Overdrive 2 Gain Control - adjusts the amount of the Overdrive 2 Channel's overdrive or distortion
23.) Overdrive 2 Volume - This controls the volume of the overdrive 2 channel. Turning it clockwise increases the volume
Overdrive 1 and Overdrive 2 Channel EQ
24.) Bass Control - adjusts the amount of low-end frequencies in your tone
25.) Middle Control - adjusts the amount of middle frequencies in your tone
26.) Treble Control - allows exact adjustment of the treble frequencies within the sound.At low setting (counter clockwise) the sound will be warm and darker in character.
27.) ISF (Infinite Shape Feature ) - The patented ISF control works in conjunction with the Bass,Middle and Treble controls.
Master
28.) Resonance Control - sets the overall bass response of the S1-200. At lower settings the cleans will be tight and funky and overdrives will be focused in their bass response
29.) Presence Control - sets the overall treble response of the S1-200. Percussive high-end can be accentuated on clean sounds and the amount of aggressive treble controlled with crunch and overdrive settings
30.) Volume - This controls the overall volume of your amplifier . Turning it clockwise increases the volume
31.) DPR (Dynamic Power Reduction) - allows the output power of the S1 200 to be reduced anywhere from 200W down to 20W of the rated power
32.) Power Indicator Light - The power Indicator will light when the amplifier is switched on.
33.) Standby - This switch enables the output stage. Always turn this switch on at least 30 seconds after the power switch . During short breaks in playing use just this switch to turn "off" and "on" the amplifier's output
34.) Power - This switch is used to turn the amplifier on and off. You should always turn this switch on before turning on the standby mode.
Rear Panel Features:
1.) Mains Input - The supplied detachable mains lead is connected here. The lead should only be connected to a power outlet that is compatible with the vltage, power and frequency requirements stated on the rear panel. If in doubt get advice from a qualified technician
2.) Mains Fuse - The value of the Mains Fuse is specified on the rear panel. Never use a fuse of the incorrect value or attempt to bypass it.
3.) H.T Fuse - The value of the H.T Fuse is specified on the rear panel. Never use a fuse of the incorrect value or attempt to bypass it
4.) Output Valves Fuse - The value of the output valves fuse is specified on the rear panel. Never use a fuse of the incorrect value or attempt to bypass it
5.) Footswitch - The supplied footswitch is connected here. The footswitch enables you to switch between the clean crunch,overdrive 1 and overdrive 2 channels
6.) MIDI Thru - Any MIDI data received at the MIDI In socket is passed out of the MIDI Thru socket so that other MIDI devices can be placed in a chain.
7.) MIDI In - If channel switching using MIDI is required, connect the MIDI device here.
8.) Impedance Selector - This control matches the amplifier's impedance to that of the connected speakers
9.) Speaker Outputs - There are two parallel speaker outputs for connecting external speaker cabinets.
10.) Speaker Emulated Output - This output emulates the tonal characteristics of a guitar speaker cabinet and provides a natural valve overdrive tone for connection to a recording device or mixing desk
11.) Effects Loop Level Switch - sets the effects loop to either +4dBV/ -10 dBV, which enables you to use it with either professional equipment (+4dBV setting ) , or with guitar level effects such as effects pedals (-10dBV setting)
12.) Effects Loop Return - Connect the (mono) output of an external effects unit here
13.) Effects Loop Send - Connect the (mono) input of an external effects unit here
Product Name | S1 200 |
---|---|
Brand | BLACKSTAR |
Sale Price | FOR INQUIRY |
Mileage | Points :1,149.99 |
수량 | |
Product Code | P0000IAT |
Product Details | Guitar Amplifier Head (200W) |
QR Code |
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720
FOR INQUIRY
FOR INQUIRY
FOR INQUIRY
FOR INQUIRY
FOR INQUIRY