PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Price | |
---|---|
Discounted Price | Php 280,000.00 |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
Points :2,800.00(1.00%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Selected by customer |
Shipping Cost | International Shipping Fee |
Description |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
Overview:
Thanks to the powerful 4” compression driver, the large sized horn, the incredibly fast woofer, RCF TT5-A offers the highest performance from a wide dispersion, active, 2 way system.
The design philosophy for the new TT+ series is based upon offering the sound engineer solutions and tools that are ready to use. Key factors are the ability to sustain very high power with highly efficient sound pressure levels. Intense sound levels are created with extremely high definition and extended dynamic range. Modern construction materials result in mechanical weight ratios that are light for practical flying and portability.
APPLICATIONS
The TT5-A is a high power, active loudspeaker designed specifically for high quality indoor and outdoor near and mid field sound amplification. It is equipped with 1600 W digital amplification, 1100 W are delivered from the low frequencies amplifier and 500 W from the high frequency digital module. The low frequencies transducer is a powerful 15” hypervented woofer with 4” voice coil. A large sized 2” titanium dome compression driver loaded to a 90°x 50° dispersion constant directivity horn provides a perfect high frequencies coverage.
ACOUSTIC DESIGN
TT5-a is the result of an incredibly advanced acoustic design, state of the art digital power amplifiers and a group of innovative processing algorithms that, running at 96 KHz, take care of the speaker linearity and its dynamic control.
CLASS D - STATE OF THE ART POWER
Two independent digital amplifiers, 1100 W low frequencies, 500 W for the high frequency driver, deliver an astonishing output power making the TT5-A one of the most powerful 2 way module on his category. Our class D amplifiers offer hi-fi sound, extremely low distortion with negligible quiescent noise and stable burst response.
60 PLUS YEARS HERITAGE IN AUDIO
HF DESIGN
DIRECT DRIVE VOICE COIL ASSEMBLY
WOOFER DESIGN
INSIDE/OUTSIDE VOICE COIL
The inside/outside coil offers many advantages:
Our inside/outside formers are made from polyimide-imide fibreglass and the area between the coil and the cone is a triple layer of Nomex - fibreglass - Nomex for maximum stiffness and accurate sound transfer.
ENCODER CONTROL
Pushing the rear encoder it is possible to select the following three functions:
SELECTION OF A SPEAKER PRESET
Pushing a third time the rear encoder the preset LED will light up. Now rotating the encoder clockwise it will be possible to select a preset. There are eight presets in three groups:
SOFTWARE
AUTOMATICALLY SCANNING
When online the RDNet Control 8 unit sequentially scans all audio devices, which are automatically assigned to digital addresses.
Applications:
1.) FEMALE XLR INPUTS (BAL/UNBAL). The system accept XLR input connectors.
2.) MALE XLR SIGNAL OUTPUT. The output XLR connector provides a loop through for speakers daisy chaining. The balanced connector is connected in parallel and can be used to send the audio signal to other amplified speakers, recorders or supplementary amplifiers.
3.) SYSTEM SET UP ENCODER. Push the encoder to select a function (gain reduction, delay, preset). Rotate the encoder to select a value or a preset
4.) GAIN REDUCTION LED. Pushing the encoder once the gain reduction indicator lights green. Then rotate the encoder to reduce the gain to the right level.
5.) DELAY LED. Pushing the encoder twice the delay indicator lights green. Then rotate the encoder to delay the speaker. The delay is expressed in meters.
6.) PRESET LED. Pushing the encoder three times the preset indicator lights green. Then rotate the encoder to load the right preset to the speaker
7.) SYSTEM SET UP DISPLAY. Display the system setting values. In case of RDNet active connection a rotating segment will light up.
8.) RDNET LOCAL SETUP/BYPASS. When released the local setup is loaded and RDNet can only monitor the speaker. When switched the RDNet setup is loaded and bypass any speaker local preset.
9.) RDNET RECALL LED. This orange LED lights up when the LOCAL SETUP/BYPASS switch is pressed. If connected, RDNet is taking control of the speaker the speaker.
10.) AC RDNET IN/OUT PLUG OPTION. The AC RDNET IN/OUT PLUG optional accessory can be installed removing a blind panel on the right side of the board. In the picture the installed accessory is shown.
11.) LIMITER LED. The amplifier has a built in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers. When the soft clipping circuit is active the LED blinks RED. It is okay if the limit LED blinks occasionally. If the LED lights continuously, turn down the signal level.
12.) SIGNAL LED. The signal indicator lights green if there is audio signal present on the main input.
13.) STATUS LED. This yellow led is ON when the amplifier is in failure mode. In this case please contact the closest RCF service centre.
14.) POWER LED. This green led is ON when the speaker is connected to the main power supply
15.) AC INPUT. Powercon locking 3-pole AC mains.
16.) AC OUTPUT. Powercon locking 3-pole AC mains output.
Technical Specification
ACOUSTICAL SPECIFICATIONS
INPUT/OUTPUT SECTION
PROCESSOR SECTION
AMPLIFIER SPECIFICATIONS
CABINET
PHYSICAL SPECIFICATIONS
Product Name | TT5A |
---|---|
Brand | RCF |
Sale Price | Php 280,000.00 |
Mileage | Points :2,800.00 |
수량 | |
Product Code | P0000HWP |
Product Details | 15-inch Active Speaker (1 pc) |
QR Code |
The Eight Basic Consumer Rights : http://www.dti.gov.ph/dti/index.php?p=720