Panel Features:
1.) The LED METER indicates the DEQ2496's input signal.The top CLIP LED lights up as soon as the input signal level is too high or the peak limiter in the Dynamics menu.
2.) Use the METER key to select the METER menu.
3.) The DEQ2496 features a built-in real-time analyzer displaying the entire frequency range.Use the RTA key to select the corresponding menu and adjust the various settings.
4.) Depending on the currently selected menu,the COMPARE key allows you to compare either complete presets or individual modules.
5.) Press the MEMORY key to select the MEMORY menu
6.) The PAGE key allows you to select the various pages within one menu.
7.) The functions performed by the keys A and B depend on the selects menu and are indicated in the display,
8.) This is the LC display of your ULTRA-CURVE PRO.
9.) The DEQ2496 has three DATA WHEELS,which can be used to select and edit various parameters-again depending on the currently selected menu.
10.) With the menu keys you can select the individual menus of the various modules.They can also be used to select specific pages from these menus.
11.) Use the POWER switch to put the DEQ2496 into operation.This switch should be set to "OFF"before you connect the unit to the mains.
12.) The FUSE HOLDER holds the mains fuse of the DEQ2496.Blown fuses must be replaced by fuses of the same type and rating.
13.)The mains connection is made using the enclosed power cord and a standard IEC receptacle.
14.) The MIDI jacks enable the DEQ2496 to communicate with a computer or other MIDI equipment.Incoming MIDI data are received on the MIDI IN,outgoing MIDI data are sent via the MIDI OUT.Received MIDI data are also present at the MIDI THRU jack,so as to pass them on unmodified to other devices.
15.)Use the WORDCLOCK input to synchronize your DEQ2496 to external equipment via a wordclock signal.This connector is on a BNC coaxial jack.
16.)Your DEQ2496 features a digital optical optical interface for the transmission/reception of data in both AES/EBU and S/PDIF formats.
17.)The digital AES/EBU interface (XLR connectors) also sends/receives AES/EBU or S/PDIF signals.
18.)The AUX OUT phone jack is an additional stereo output,which allows you to tap the audio signal present at the digital outputs in analog form.
19.)The RTA/MIC IN XLR connector can be used to connect a measurement microphone providing an input signal for the real-time analyzer or SPL meter.
20.)The MAX switch raises the maximum level present at the MAIN inputs/outputs from +12 dBu to +22 dBu.
21.)These balanced XLR connectors provide the analog output signal of the DEQ2496.
22.)These balanced XLR inputs are used to connect analog input signals.
Specifications: