Active Speaker 2 Way Amplifier Speaker, 4 x 6.5 Inches + 1 x 1.4 Inches, 600 + 300W RMS

VERTUS CLA 406A

Overview

VERTUS CLA 406A 600W + 300W 133 dB SPL Active Column Line Array

Increased demand for an easy to set-up, sonically superior portable sound reinforcement system has prompted FBT to introduce a new version of the renowned VERTUS CLA460A active column array. Boasting the same impeccable audio performance as the original but with new features designed to aid mobile users, the new VERTUS CLA 406.2A and VERTUS CLA 206A active columns are receiving their official launch at Frankfurt Pro Light + Sound 2018.

The launch of the new VERTUS columns follows a steep rise in the use of the VERTUS CLA406A for mobile sound reinforcement applications – a trend spurred on by the column’s depth of versatility and performance. Now making life easier for those on the road, both the CLA406.2A and more compact CLA206A have been designed with portability in mind, from the rugged hardware to new accessories which make set-up both extremely quick and highly intuitive.

Included within the extended accessories range is a flybar for easy system suspension (users simply add a clamp for tubular coupling), plus a foldable floor stand offering a choice of angles from 0°-10°, and a bracket for coupling two enclosures at angles of 0°- 20° (in steps of 5°). The accessories connect to the cabinets using supplied M10 screws for fixed installation, or via quick release pins (optional) for mobile use.

In terms of hardware, the enclosures now offer four lateral inserts which can accept both the quick release pins and M10 screws, while M6 rear suspension points have been added for additional installation flexibility.

CLA 118SA are sold separately

Features

• 2-way bi-amplified line array column system

• 4 x 165mm (6.5”)  custom woofer voice coil 38mm (1.5”)

• B&C HF neodymium driver with 36mm (1.4”) exit and 64mm (2.5”) voice coil

• Waveguide FBT large format with dispersion 100 ° H x 25 ° V

• Frequency response from 65Hz to 20KHz

• Amplifiers Class D 600Wrms for LF and HF 300Wrms with switching power supply

• Processor DSP with 8 EQ presets

• Control Panel with XLR input and link, volume, presets, filter-HP, ground-lift

• Neutrik powerCON power IN and LINK connectors

•  12mm (1/2”) birch plywood with scratch-resistant coating.

• 12 attachment points above and below for the optional hardware that allows the installation of hanging or pair two CLA406A with angle of 0 ° – 10 ° – 20 ° in the vertical plane

• Top side tilted 10 ° for the inclination of two columns without damaging gap between the waveguides for a wavefront extremely consistent over the 18kHz

• 35mm (1.3/8”)  top hat for stand mount facility

• It is ideal for live applications, assisted by sub CLA 118SA, which for fixed installations

Specifications

• Configuration: Line Array – 2 Way

• Built-in amplifier LF/HF: 600/300w RMS

• Built-in amplifier peak LF/HF: 1200/600W

• Frequency response: 65Hz – 20kHz

• Low Frequency woofer: 4x 6.5″ with 1.5″ VC

• High Frequency driver: 1x 1.4″ Neodymium with 2.5″ VC

• Maximum SPL cont/peak: 133dB

• Dispersion: 100 x 25 (H x V)

• Input impedance: 22kohm

• Crossover Frequency: 1.2kHz

• AC Power requirements: 640VA

• Input connector: XLR with link out

• Power cord: 5m PowerCon True1

• Net Dimension (WxHxD): 190 x 1235 x 290mm

• Net Weight: 27kg

• Transport Dimension (WxHxD): 290 x 1235 x 390mm