XH200 

Distribution Power Amplifier

Overview

The XH200 is the ideal distribution power amp for use with numerous high-impedance speakers in theatre, hall, and conference facility installations. In addition to being remarkably lightweight, the XH200 is a compact 2U size that will fit comfortably in just about any installation. This combination of high power output and small size has been realized through the use of an advanced switching power supply. The XH200 also features a monitor/remote connector that allows remote status monitoring and control from an external device.

Features

• Two 200W Channels In a 2U Power Amp

• Monitor/Remote and Other Important Functions

• Euroblock Input/Output Connectors, and Barrier Strip Output Connectors

Fit comfortably in just about any installation

The Yamaha XH200 is the ideal distribution power amp for use with numerous high-impedance speakers in theatre, hall, and conference facility installations. In addition to being remarkably lightweight, the XH200 is a compact 2U size that will fit comfortably in just about any installation. This combination of high power output and small size has been realized through the use of an advanced switching power supply. The XH200 also features a monitor/remote connector that allows remote status monitoring and control from an external device.

Two 200W Channels In a 2U Power Amp

The XH200 is a two-channel high-output power amp that can be switched between 70V and 100V line operation (200W x 2 channels into 24ohms-70V / 48ohms-100V). This high-impedance power amp is designed for installations in which multiple speakers are driven in parallel. A high-efficiency switching power supply means that the XH200 is significantly smaller and lighter than comparable amplifiers: It fits comfortably in a 2U rack space and weighs only 10 kg.

Monitor/Remote and Other Important Functions

A rear-panel MONITOR/REMOTE connector allows the unit to be controlled or monitored from a remote location. The front panel provides dB-calibrated detented attenuators for each channel, and a comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range of conditions.

Euroblock Input/Output Connectors

Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection. High pass filters with switchable 40 Hz or 80 Hz roll-off provide an extra margin of system flexibility.

Specifications

DescriptionDistribution Power Amplifier

Output Power

High Impedance100V Line (RL=50Ω) - 200W x 2

70V Line (RL=25Ω) - 200W x 2

Voltage Gain38dB (100V)/35dB (70V)

Input SensitivityRL=8Ω: +4dBu

S/N Ratio20Hz~20kHz, DIN AUDIO: 103dB

Power Consumption

1/8 power (4Ω pink noise)400W

Idle40W

Standby5W

THD+N40Hz~20kHz, 1/2 power, RL=4Ω - Less than 0.1%

Frequency ResponsePo=1W, HPF=40Hz, 80Hz~20kHz: +0dB, -0.5dB

Crosstalk

1kHz, half power, Att. max, input 600Ω shunt: Less than -60dB

Maximum Input Level+22dBu

Input Impedance20kΩ (balanced), 10kΩ (unbalanced)

Controls

Front PanelPOWER switch x 1 (push on/push off)

Attenuator x 2 (31position)

Rear panelOUTPUT VOLTAGE switch x 1 (100V/70V),

HPF switch x 1 (40Hz/80Hz, 12dB/oct)

Connectors

InputEuroblock connector x 2 pairs (balanced)

OutputBarrier strip x 2 pairs

Monitor/RemoteD-SUB 15P x 1

AC INAC inlet x 1

IndicatorsPOWER/STAND-BY x 1 (Green/Orange),

PROTECT/MUTE x 2 (Red), SIGNAL x 2 (Green),

CLIP/LIMIT x 2 (Red)

Load ProtectionPOWER switch on/off mute, DC-fault: Output relay Off

(Restored automatically), Clip limiting: THD ≥ 0.5%

Amplifier ProtectionThermal: Output Mute (heatsink temp ≥ 90°C)

(Restored automatically),VI limiter (RL ≤ 16Ω): Output limit

Power Supply ProtectionThermal: Amplifier shuts down automatically

(Operation not restored automatically, heatsink temp ≥ 90°C)

Cooling FanVariable-speed fan x 1

Power Requirements120V, 220V-240V; 50Hz/60Hz

Packaging Info 

 Dimensions (H x W x D) 3.44" (88 mm) x 18.88" (480 mm) x 16.25" (412 mm)

Net weight9.8 kg

What’s in the Box

- XH200

- Owner’s manual

- AC power cable

- Security cover

- 4x 3-pin Euroblock connector