SENNHEISER E 912 (S)WITH SWITCH
POLARISED CONDENSER MICROPHONE
![]()
Overview
The SENNHEISER e 912 S is a high-quality, pre-polarised condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.
The e 912 S can be switched on and off via an integrated membrane switch.
Features
- Programmable membrane switch
- Very unobtrusive due to flat design
- Extremely rugged sound inlet basket
- Rubber damping plate on base
- Mounting slots for mounting the microphone to table tops, lecterns, etc.
- Gold-plated XLR connector
- Integrated electronics (instead of in-line preamp)
- An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
- The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
- The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
- With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear).
Delivery Includes
- Microphone e 912 S
- Pouch
- User guide
Technical Data
| Transducer principle (Microphone) | pre polarised condenser microphone |
| Pick-up pattern | half-cardioid |
| Frequency response (microphone) | 20 Hz - 20 kHz |
| Sensitivity in free field, no load (1kHz) | 6 (10) mV/Pa Depending on adjusted frequency response curve. |
| Impedance | < 100 Ohm |
| Min. terminating impedance | 1 kOhm |
| Maximum sound pressure level (passiv) | 134 dB SPL |
| Equivalent noise level | 26 dB (A) |
| Equivalent noise level weighted as per CCIR 468-3 | 37 dB |
| Phantom powering | P48 |
| Current consumption | 2,8 mA |
| Connector | XLR-3 |
| Weight | 550 g |
| Dimensions | 126.5 x 105 x 26.5 mm |