Specifications:
General
- Number of input channels..................................2
- Number of output channels................................4
- Peak total output all channels driven............. 20000 W
- Peak output voltage per channel.....................194 V
- Max output current per channel....................... 67 A peak
Max output power all channels driven
- 16 ohms.....................1150
W
- 8 ohms....................... 2300 W
- 4 ohms 1......................4400
W
- 2 ohms 1 .....................4800
W
- All channels driven into optimal impedance interval.............. >5000 W into 2.2 - 3.3 ohms
Max output power bridged
- 8 ohms................... 8800 W
- 4 ohms .....................9600 W
- Bridged into optimal impedance interval..............>10000 W into 4.4 – 6.6 ohms
Performance
- THD + N 20 Hz - 20 kHz for 1 W ................................................ < 0.05 %
- THD + N at 1 kHz and 1 dB below clipping .....................................< 0.04 %
- Dynamic range with digital inputs (for all supported sample
rates) ........ >114 dB
- Dynamic range with analog inputs......................................................>110 dB
- Frequency response (1 W into 8 Ohm, 20 Hz - 20kHz).......................+/- 0.05 dB
- Common Mode Rejection (CMR)................................................... >74
dB, 20 Hz to 20 kHz
- Internal Sample Rate / Data path....................................................96 kHz / 32 bit floating point
- Product propagation delay (straight path analog server input
-> amp).........1.61 ms
- Product propagation delay AES 96 kHz / analog input.............................. 1.68 ms
Sample Rate Converters
- THD + Noise ................................0.00003
%, 20 Hz - 20 kHz, unweighted
Analog to Digital inputs
- Inputs.......................................2 inputs x 2
link
- Input sensitivity settings............ +12
or +26 dBu
- THD + Noise.............................. 0.00022
%, typical at 1 kHz unweighted at +26 dBu headroom setting
- THD + Noise .............................. 0.00033
%, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting
Gain, Sensitivity and Limiters
- Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) ............17.8 - 194 V, step size 0.1 V
- Current Peak Limiter < 300 ms............................ 67 A peak
- Current Average Limiter (CAL) > 300 ms....................33 Arms
- MaxRMS (rms voltage limiter)...................... Yes
- MaxPeak (peak voltage limiter)......................... Yes
- Output attenuator ......................................-Inf
to 0 dB, step size 0.25 dB
AES3/EBU (sample rate converters available as desired)
- Support redundant paths................... Yes
- Flexible topology ............................. yes
- Network latency ........................... 0.8,
1.3 and 4 ms
Back panel Interface
- AES / EBU / I/O (input + link) ........................... 2 x 3-pin XLR
- Analog, 2-channel I/O (input + link)....................4 x 3-pin XLR, electronically balanced
- Output connectors.............................. Neutrik
speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs)
- Auto 10/100, Auto Uplink........................2
x RJ45 etherCON
- Control and monitoring interface..................Via Ethernet for Lake Controller software, or DLM (the
3rd party protocol)
- Detachable mains cord..............................Neutrik
PowerCon rated at 250V/32A
- Cooling.......................................... Three fans,
front-rear airflow, temperature controlled speed
Device presets
- Local memory locations for the settings of the product ............... 100
Front-panel user interface
- Display .............................................. 2.5 inch,
daylight readable LCD
- Fault/Warning/Limit/Clip indicators............ RGB LEDs and detailed fault description on display
- Mute and soft function buttons ................ 8 provided
- Standby Power button ................... On/Standby
- Meter button................................Toggles
through meter views
- Menu........................................... Provides a menu
driven interface for full function front panel control
- Rotary Encoder ............................Yes
- Exit Button....................................Provides
a “back” function
Power
- Operating voltage................................70-265
V AC
- Soft start / Inrush power ...................... Yes/
Max 8 A
- Power Average Limiter (PAL)................ Yes
- Power Factor Correction (PFC)....................Yes
- Breaker Emulation Limiter (BEL) ...................Yes, selectable breaker profile
- Under Voltage Limiter (UVL).......................... Yes
Dimensions
- Rack rail to rear panel..................... W:
483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")
Weight
- Weight...................... 17 kg (37 lbs)
Finish
- Finish........................ Black painted
steel chassis with black painted steel / aluminum front
Approvals
- Approvals....................CE,
ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
NOTES
1: Asymmetrical loading of the outputs will yield even
higher ratings. If one (or two) channel(s) has reduced power requirements, then
the voltage drop from the power supply will be reduced, resulting in higher
power availability for the other channel(s).