Overview:

The Libec LX7 Tripod With Pan and Tilt Fluid Head and Floor Spreader delivers superior value with an aluminum tripod and a pan and tilt fluid head. It has a maximum height of 65.4" and a minimum height of 22" (56 cm). It can handle a load of up to 17.5 lb, and you can trace every motion, start to finish, with its super torque system. The fluid head is equipped with a sliding plate with a sliding range of +/- 1.6". The entire kit weighs 12.1 lb (5.5 kg). The LX7 can operate in a temperature range of -4 to +140°F (-20 to +60°C). This tripod is ideal for small to mid-sized DV/HD and semi-shoulder cameras.


Features:

System Components:


Specifications:


LX7 Head - Identification of Parts:

Mounting the Head to the Tripod:

1.) Loosen the bowl clamp and remove it from the head.

2.) Set the head on the tripod.

3.) Hold the head,look into the bubble level and glide the ball leveler while controlling the bubble to stay at the center.

4.) Firmly tighten the bowl clamp

5.) Loosen the pan handle clamp

6.) Set it to your most convenient position

7.) Firmly tighten the pan handle clamp

RT30B - Identification of Parts:

Using of Binding Strap:

1.) Undo: To spread out the tripod first undo the hook that binds the legs,the strap will automatically retract back its position

2.) Pull the binding strap: To bind the legs,hold the hook and pull out the strap

3.) Bundle the 3 legs: Loop around the legs and strap in.

Method of Locking the Extended Legs

1.) Loosen the upper lock knob,pull to extend the legs.

2.) Adjust the legs  to about the same desired length and tighten all the upper lock knob.


Using of Spike and Spike Cap & How to use the grip

1.)  Remove                                    1.) Hold the grip

2.) Spike

3.) Spike Cap

Head and Tripod Dimensions:

SP-2B - Identification of Parts:


Spreader Dimensions: