Overview:
McLelland CX series crossover offer the best dynamic range for clear transparent sounding, state of-art circuitry with absolutely flat summed amplitude response.MCLELLAND CX-152 Active Crossover
Features:
- Professional crossover with high slew rate circuitry
- Over dB dynamic range for clear transparent sound
- 24 dB per Octave
- State-variable Link witz-Riley Filter
- Active Balanced XLR and 1/4" TRS input and output connectors
- Low & High mute buttons
- Clip LED to indicate distortion and Phase inversion switches
- CD boost electronic circuitry
Rear Panel Features:
Sample Set-up (Drawing Figure)
MCLELLAND CX-152 Stereo Two-way :
When stereo two-way operation is desired with the CX-152 there are no patch cords required. Plug the left line-in and the right line-in to INPUT 1 and INPUT 2 respectively. From the LOW OUT 1 and LOW OUT 2 attach a cable to the input of the left and right low frequency amplifiers. From the HIGH OUT 1 and HIGH OUT 2 attach a cable to the input of the left and the right high frequency amplifiers.
MCLELLAND CX-152 Mono Three-way :
When mono three-way operation is desired with the CX-152 there is no patch cords required. Plug the line-in into INPUT 1. Attach cable from LOWOUT 1 to the low frequency amplifier. Do not anything into HIGH OUT 2 or INPUT 2. Mode switch push mono. These jacks are automation normalled when nothing is plugged into them. Attach a cable LOWOUT 2 to the midrange amplifier. Attach a cable from high to the high frequency amplifier.
Specifications:
- Type: 2 Way Stereo/3 Way Mono
- Input Impedance: 20kΩ(Bal)
- Output Impedance: <300Ω
- Maximum Output Level: >2KΩ + 22dBm
- Signal/Noise Ratio: >95dB
- Frequency Response: 20~20KHz. +0-3dB
- Frequency Range: x1 80Hz~920Hz / x10 800Hz~9.2KHz
- Power Requirement: 115VAC, 50/60Hz(230VAC available)
- Dimension (H x W x D): 4.45 x 48.3 x 21.6 cm
- Weight: 3.375Kgs