Overview:

You've never experienced professional live sound speakers like this.

Pro with a plus

Hear crystal clear

Modern amplifier design

 Hang 'em High

Just what you need

 Full metal grille

The Truesonic Wireless TS112W and TS115W are two-way 12” and 15” models respectively. With 800 watts of Class D power and an SPL of 125 dB for the TS112W and 126 dB for the TS115W, the speakers offer more power and performance than any other loudspeaker in their class.

Connect your way

"The Alto Truesonic series is outstanding. Now that Bluetooth has been integrated, there is no live sound scenario or DJ event you can't handle." - Virtual DJ (VirtualDJ.com)


Features:

Rear Panel Features:

 

1. POWER INPUT – Connect the included power cable to this input and connect the other end of the cable to a power source. Make sure the loudspeaker's POWER SWITCH is  set to "off" when plugging and unplugging the cable.

2. POWER SWITCH – Turns the loudspeaker on/off. Make sure the VOLUME knob is set to "zero" before turning it on.

3. POWER LED – Illuminates when the loudspeaker is on.

4. PAIR BUTTON – Press and release this button to pair the loudspeaker to your Bluetooth device.

5. BLUETOOTH VOLUME – Turn this knob to adjust the input volume of your paired Bluetooth device.

6. STEREO LINK BUTTON – When using a pair of Truesonic Wireless loudspeakers, press and release this button on each speaker to "link" them for wireless stereo audio.

7. INPUT – Use a standard 1/4" TRS or XLR cable (not included) to connect your sound source to this input.

8. INPUT VOLUME – Turn this knob to adjust the input volume for each INPUT.  SIGNAL LIMIT LED – Illuminates RED when the internal protection circuit is activated by a high signal level.

10. MIX OUT – Use a standard XLR cable (not included) to connect this jack to the input of another loudspeaker.

11. MIX OUT SELECTOR – When disengaged (PRE VOL), the MIX OUT level will be unaffected by the INPUT VOLUME controls. When engaged (POST VOL), the MIX OUT level can be adjusted by the INPUT VOLUME controls.   CONTOUR – Engage (depress) this switch to equalize the mix for optimal music playback. Disengage (raise) the switch during live performance for a flatter response.

13. GROUND SWITCH – Press this switch to reduce hum or noise.

14. PAIRING/LINKING TONE VOLUME – Below and to the left of the STEREO LINK BUTTON, there is a small opening that exposes a recessed level control.

Connection Diagram:


This diagram is a suggestion for setting up the speaker with audio connections.

 *Note: Microphones, mixer, and cables are not included. Second Truesonic Wireless  speaker sold separately

To set-up 2 Loudspeakers (STEREO):


1.) Choose a MASTER loudspeaker - MASTER can be either loudspeaker. Be sure to choose only one.The remaining speaker will be the SLAVE.

2.) Press and Release PAIR BUTTON on the MASTER loudspeaker only. - You should hear a tone repeat once every second; the PAIR LED will flash. Move to step 3.

3.) Select ALTO PRO WIRELESS on your Bluetooth audio device

4.) Wait for device to pair.This may take a while (roughly 60 seconds or longer) - When successfully paired, the tones will stop and the PAIR LED will light solid. If the device fails to connect try steps 2 and 3 again.

5.) Press and Release LINK BUTTON on MASTER loudspeaker first. - The LINK LED will flash and you will hear a repetitive tone sequence (beep,beep). If this does not work wait 5 seconds and press the button again.

6.) Press and Release LINK BUTTON on SLAVE loudspeaker. - The LINK LED will flash and you will hear a repetitive tone sequence (beep,beep). If this does not work wait 5 seconds and press the button again.

7.) Wait for MASTER and SLAVE to link - When successfully linked, the tones will stop and the link LEDs will light solid on both speakers. If they do not link after 2 minutes , power both loudspeakers off then back on and return to step 2.

8. Play Music.

To set-up 1 Loudspeaker:


1. Press and Release PAIR BUTTON on the loudspeaker - You should hear a tone repeat once every second.; the PAIR LED will flash . Move to step 3.

2.Select ALTO PRO WIRELESS on your Bluetooth audio device

3. Wait for device to pair.This may take a while (roughly 60 seconds or longer) - When successfully paired, the tones will stop and the PAIR LED will light solid. If the device fails to connect try steps 2 and 3 again.

4.Play Music

Truesonic Wireless Instructional Video:

What's in the Box?

  • Truesonic Wireless speaker
  • Power cable
  • Quickstart Guide
  • Safety Instructions & Warranty Information Booklet  

Specifications:

  • Transducer Low: 15” Woofer, with 2” voice coil
  • Transducer High: Neodymium compression driver, 1” exit with 1” voice coil
  • Power Amplification: 800 Watts peak (670 W LF + 130 W HF), 400 Watts continuous (335 W LF + 65 W HF)
  • Frequency Range (-10 dB): 42 Hz -20 kHz
  • Frequency Response (±3 dB): 53 Hz -19 kHz
  • Maximum SPL @ 1m: 126 dB peak, 123 dB continuous
  • -6 dB Nominal Coverage: (80° / 100° H x 60° V)
  • Active Crossover: 2.5 kH
  • Wireless Connectivity: Bluetooth (A2DP)
  • Wireless Range: Up to 30'
  • Connectors:  2 x Mic / Line Female XLR - 1/4” combo inputs, 1 x Loop - Out Male XLR
  • Input  Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu, Input Impedance 15 kOhms
  • External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
  • Protection Features: Over-excursion, Thermal, Driver
  • AC Power: 100 VAC, or 110 – 120 VAC, or 220 - 240 VAC (50 / 60 Hz)
  • Enclosure: Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille
  • Mounting: Integrated pole-socket (36 mm dia.) Two handles, 5 M10 threaded sockets: 2 top, 2 bottom, 1 pullback
  • Dimensions (WxLxH): 16.9in x 14.3in x 26.75in
  • Weight: 39 lb