Overview:
A Whole New Experience
- You've never experienced professional live sound speakers like this. The TS112W brings you all the premium features you've come to expect from Alto Professional: massive wattage, efficient Class D amplification and cutting-edge design. Add to all of this: unprecedented wireless connectivity. Now, you can harness that same massive power and clean, crystal-clear sound using your smartphone, tablet or other Bluetooth device such as a laptop computer. It’s the best-selling Truesonic sound, now with wireless technology built in.
Modern Amplifier Design
- The TS112W has a Class D amplifier integrated into the cabinet. Class D amps are lighter than other amplifier designs, and provide tons of output with plenty of punch. The TS112W delivers with 800 Watts of power. Class D amplifiers run much cooler, so the amp doesn't work as hard to deliver your sound with authority. Additionally, TS112W’s precision-engineered drivers make sure that virtually no energy is wasted. That translates to more of the power from the amplifier actually working to generate sound rather than heat, giving the speaker better real-world performance than other speakers with comparable published specifications.
Hang 'Em High
- Optimal speaker placement can be challenging, especially if your speakers don't have what it takes to go anywhere. Whether you need to fly your speakers, pole-mount them, or use them as floor monitors, Truesonic speakers are ready for you. All Truesonic speakers feature standard 36mm pole-mounting insets on the bottom. And if you need to fly them, it's no problem. The TS112W has five M10 rigging points. This makes the TS112W a remarkably venue-friendly speaker. Use it anywhere you need it.
Just What You Need
- Whether you're performing at a coffee house, wedding, house of worship, or other small to medium-sized venue, the Truesonic TS112W is your best choice. It's easy to get your Truesonic speakers to the gig with the carrying handles and lightweight design. Once you're there you won't need to be a live sound guru to figure out how to EQ the speakers thanks to the built-in Contour EQ switch that can help adjust for those situations where you need an EQ alternative for recorded music playback.
Full metal grille
- You can never be too safe around the stage. We know stuff happens that you just can't predict. Sometimes it's the flying drumstick, a falling mic stand or worse. Every Truesonic speaker comes with a complete front grille from top to bottom that protects not only your low frequency driver, but your high frequency driver as well. With Truesonic speakers, you get extra peace of mind knowing that whatever comes at your sound system, we've got it covered, literally.
Connect Your Way
- The Truesonic Wireless line simplifies the connection to multiple devices with the ability to play audio from any Bluetooth audio-equipped device such as an iPad, iPod touch, iPhone, even a laptop. In addition, both TS112W and TS115W include two Mic/Line Female XLR - 1/4” combo inputs with independent gain controls, so it’s easy to get up and running with just about any audio source.
Pro with a Plus
- The TS112W and TS115W are professional loudspeakers, equipped with all the connections you need to hook up using traditional cables. Whether you use them in a permanent sound reinforcement installation or as portable PAs, you'll have a versatile loudspeaker that can handle every gig, and blast music from your mobile device at the after party. The TS112W and TS115W provide exceptionally clean, transparent sound from wired or wireless sources.
Features:
- Built-in Bluetooth® A2DP wireless technology*
- Stream audio wirelessly from iPad, iPhone, iPod touch, Android devices and more
- Stream stereo signal, left and right, to separate speakers—no cables required
- Use as traditional PA loudspeaker or as floor wedge monitor
- 800 Watts Class D power
- 12” low-frequency transducer, 1” neodymium driver
- Two mic/line combo inputs with independent volume controls
- XLR output to link speakers
- Lightweight, trapezoidal cabinet with handles
- Stand and pole-mountable or flyable
- Contour switch for increased EQ control
- Clip Limiter with red LED
- Ground Lift switch
- Accurate audience coverage, not just on-axis
- Designed and tuned in the USA
1. POWER INPUT – Connect the included power cable to this input and connect the other end of the cable to a power source. Make sure the loudspeaker's POWER SWITCH is set to "off" when plugging and unplugging the cable.
2. POWER SWITCH – Turns the loudspeaker on/off. Make sure the VOLUME knob is set to "zero" before turning it on.
3. POWER LED – Illuminates when the loudspeaker is on.
4. PAIR BUTTON – Press and release this button to pair the loudspeaker to your Bluetooth device.
5. BLUETOOTH VOLUME – Turn this knob to adjust the input volume of your paired Bluetooth device.
6. STEREO LINK BUTTON – When using a pair of Truesonic Wireless loudspeakers, press and release this button on each speaker to "link" them for wireless stereo audio.
7. INPUT – Use a standard 1/4" TRS or XLR cable (not included) to connect your sound source to this input.
8. INPUT VOLUME – Turn this knob to adjust the input volume for each INPUT. SIGNAL LIMIT LED – Illuminates RED when the internal protection circuit is activated by a high signal level.
10. MIX OUT – Use a standard XLR cable (not included) to connect this jack to the input of another loudspeaker.
11. MIX OUT SELECTOR – When disengaged (PRE VOL), the MIX OUT level will be unaffected by the INPUT VOLUME controls. When engaged (POST VOL), the MIX OUT level can be adjusted by the INPUT VOLUME controls. CONTOUR – Engage (depress) this switch to equalize the mix for optimal music playback. Disengage (raise) the switch during live performance for a flatter response.
13. GROUND SWITCH – Press this switch to reduce hum or noise.
14. PAIRING/LINKING TONE VOLUME – Below and to the left of the STEREO LINK BUTTON, there is a small opening that exposes a recessed level control.
Connection Diagram:
This diagram is a suggestion for setting up the speaker with audio connections.
*Note: Microphones, mixer, and cables are not included. Second Truesonic Wireless speaker sold separately
To set-up 2 Loudspeakers (STEREO):
1.) Choose a MASTER loudspeaker - MASTER can be either loudspeaker. Be sure to choose only one.The remaining speaker will be the SLAVE.
2.) Press and Release PAIR BUTTON on the MASTER loudspeaker only. - You should hear a tone repeat once every second; the PAIR LED will flash. Move to step 3.
3.) Select ALTO PRO WIRELESS on your Bluetooth audio device
4.) Wait for device to pair.This may take a while (roughly 60 seconds or longer) - When successfully paired, the tones will stop and the PAIR LED will light solid. If the device fails to connect try steps 2 and 3 again.
5.) Press and Release LINK BUTTON on MASTER loudspeaker first. - The LINK LED will flash and you will hear a repetitive tone sequence (beep,beep). If this does not work wait 5 seconds and press the button again.
6.) Press and Release LINK BUTTON on SLAVE loudspeaker. - The LINK LED will flash and you will hear a repetitive tone sequence (beep,beep). If this does not work wait 5 seconds and press the button again.
7.) Wait for MASTER and SLAVE to link - When successfully linked, the tones will stop and the link LEDs will light solid on both speakers. If they do not link after 2 minutes , power both loudspeakers off then back on and return to step 2.
8. Play Music.
To set-up 1 Loudspeaker:
1. Press and Release PAIR BUTTON on the loudspeaker - You should hear a tone repeat once every second.; the PAIR LED will flash . Move to step 3.
2.Select ALTO PRO WIRELESS on your Bluetooth audio device
3. Wait for device to pair.This may take a while (roughly 60 seconds or longer) - When successfully paired, the tones will stop and the PAIR LED will light solid. If the device fails to connect try steps 2 and 3 again.
4.Play Music
Truesonic Wireless Instructional Video:
What's in the Box?
- Truesonic Wireless speaker
- Power cable
- Quickstart Guide
- Safety Instructions & Warranty Information Booklet
Specifications:
- Transducer Low: 12” Woofer, with 2” voice coil
- Transducer High: Neodymium compression driver, 1” exit with 1” voice coil
- Power Amplification: 800 Watts peak (670 W LF + 130 W HF), 400 Watts continuous (335 W LF + 65 W HF)
- Frequency Range (-10 dB): 54 Hz - 20 kHz
- Frequency Response (±3 dB): 65 Hz - 19 kHz
- Maximum SPL @ 1m: 125 dB peak, 122 dB continuous
- -6 dB Nominal Coverage: (80° / 100° H x 60° V)
- Active Crossover: 2.5 kH
- Wireless Connectivity: Bluetooth (A2DP)
- Wireless Range: Up to 30'
- Connectors: 2 x Mic / Line Female XLR - 1/4” combo inputs, 1 x Loop - Out Male XLR
- Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu, Input Impedance 15 kOhms
- External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
- Protection Features: Over-excursion, Thermal, Driver
- AC Power: 100 VAC, or 110 – 120 VAC, or 220 - 240 VAC (50 / 60 Hz)
- Enclosure: Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille
- Mounting: Integrated pole-socket (36 mm dia.) Two handles, 5 M10 threaded sockets: 2 top, 2 bottom, 1 pullback
- Dimensions (WxLxH): 15in x 14.3in x 25.5in
- Weight: 39 lb