Overview:

Yamaha, with more than a century of experience in the field of music, has channeled its dedication to producing fine musical instruments into the creation of a speaker that allows people to enjoy life with music. Soavo™ Concept: A speaker that can reproduce music that offers the reality of "Natural Sound."

Soavo Concept: Delivering Natural Sound

The YAMAHA SOAVO-1 sound is characterised by: no colouration, so the sound is completely unembellished; high resolution, for good detail even at low levels; transparency, for a crisp, bracing feeling; and a deep stereo image with well balanced depth and width.

 

A-PMD Woofer and Midrange Cones

Aluminium Dome, DC-Diaphragm™ Tweeter

 

Selected High Performance Parts

Carved Wooden Port

Innovative Cabinet Design

Three-Way Mitered-Joint Construction for a Rigid body

 

Tweeter Plate

Birch Veneer Cabinet with Open-Pore Finish

Diecast Aluminium Stands

 

Independent Direct Crossover Connections

Features:

Placing the Speakers

Connections to your Amplifier (Standard Connections)

  • Connect the screw-type terminals at the rear of the speakers to the speaker terminals of the amplifier with the speaker cable (sold separately)
  • Connect the (+) terminals on the amplifier and the speakers using one side of the cable. Connect the (-) terminals on both components using the other side of the cable
  • Connect one speaker to the left (L) terminals of your amplifier and another speaker to the right (R) terminals, making sure not to reverse the polarity(+,-). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass.

Connections to your Amplifier (Bi-wired Connections)

  • To connect the speaker to the output terminals of the amplifier, two pairs of cables for each of the woofer and the tweeter/mid-range are used instead of standard connections.
  • This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving current of the speakers.Consequently, purer sound quality can be expected.
  • To utilize bi-wired connections, remove the jumper cables from the terminals first, and then connect the woofer and the tweeter/mid-range to the amplifier separately using two pairs of cables.



Specifications:

  • Type ...................................... 3-way 4-speaker bass reflex speaker system Magnetic shielding type
  • Driver ...................................... Dual 16 cm (6-1/2”) cone woofer , 13 cm (5”) cone midrange , 3 cm (1”) aluminum dome tweeter
  • Impedance ................................................................... 6 Ω
  • Frequency Response ................. 35 Hz to 50 kHz (–10 dB) to 100 kHz (–30 dB)
  • Nominal Input Power .................................................. 50 W
  • Maximum Input Power ............................................. 200 W
  • Sensitivity .................................................. 89 dB/2.83 V/m
  • Crossover Frequency ................................... 500 Hz, 5 kHz
  • Dimensions (WxHxD) .......................349 x 1051 x 487 mm (13-11/16” x 41-3/8” x 19-3/16”)
  • Weight .................................................27 kg (59 lbs. 8 oz
  • Available Finishes.................................................Black