Overview:

Yamaha, with more than a century of experience in the field of music, has channeled its dedication to producing fine musical instruments into the creation of a speaker that allows people to enjoy life with music.

Soavo Concept: Delivering Natural Sound

 

A-PMD Woofer

Aluminium Dome, DC-Diaphragm™ Tweeter

Selected High Performance Parts

Innovative Cabinet Design

 

Tweeter Plate

Birch Veneer Cabinet with Open-Pore Finish

Three-Way Mitered-Joint Construction for a Rigid Body

Independent Direct Crossover Connections

Features:

Placing the Speakers
Place the speakers on a sturdy, vibration-free surface, or on a  
well-built stand.

Yamaha speaker stand SPS-900 (optional)

You can use this unit as a floor stand speaker when  installing on an SPS-900. In this case, use screw holes on the bottom of this unit

Connecting to your Amplifier (Standard Connections)

You need a commercially available speaker cable.

The size and/or material of a speaker cable affects on the  sound quality. Therefore, we recommend you purchase a  high-quality speaker cable to exert the performance of this  unit.

  • Connect the screw-type terminals at the rear of the  speakers to the speaker terminals on the amplifier with  a speaker cable (sold separately).
  • Connect the + terminals on the amplifier and the  speakers using one side of the cable. Connect the –  terminals on both components using the other side of  the cable.
  • Connect one speaker to the left (L) terminals of your  amplifier, and another speaker to the right (R) terminals, making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound  will be unnatural and lack bass



Connecting to your Amplifier (Bi-Wired Connections)

When connecting the speaker cable, you must remove the jumper cable.

  • To connect the speaker to the output  terminals of the amplifier, two pairs  of cables for each of the woofer and   the tweeter are used instead of  standard connections.
  • This type of  connection decreases the  modulation distortion caused by  electric resistance of the cables and  driving current of the speakers.
  • Consequently, purer sound quality can be expected.

Specifications:

  • Type .................................. 2-way bass reflex speaker system Non-Magnetic shielding type
  • Driver.......................................... 16 cm (6-5/16”) cone woofer 3 cm (1-3/16”) aluminum dome tweeter
  • Impedance ........................................................................ 6 Ω
  • Frequency response ......................45 Hz to 50 kHz (– 10 dB) to 100 kHz (– 30 dB)
  • Nominal input power .......................................................30 W
  • Maximum input power ...................................................120 W
  • Sensitivity ....................................................... 88 dB/2.83 V/m
  • Crossover frequency ...................................................... 3 kHz

Dimensions (W x H x D)

  • Including terminals................................220 x 380 x 353 mm (8-11/16” x 14-15/16” x 13-7/8”)
  • Speaker cabinet....................................220 x 380 x 329 mm (8-11/16” x 14-15/16” x 12-15/16”)
  • Weight .......................................................... 9.7 kg (21.4 lbs.)
  • Color.........................................................Black