The AUDIX TM1 is a 6 mm pre-polarized condenser microphone used
for test and measurement applications. The TM1 is known for its linearity,
accurate response, consistency, ease of use and affordability.
Equipped with a uniformly controlled omnidirectional polar
pattern, the TM1 is designed to capture acoustic measurements for room analysis
software programs, real time analyzers and other sound control devices.
With a
flat frequency range of 20 Hz – 25 kHz, the TM1 is an excellent tool for sound
engineers, sound companies and recording enthusiasts.
Features:
6mm pre-polarized condenser capsule
Linear response
Precision machined brass housings
Low noise electronics
Replaceable electronics and capsule
Applications:
Test and measurement
Real time analyzers
Room analysis software programs
Ambient room miking
What's in the Box?
Heavy duty tension fit mic clip (DCLIP)
Carrying pouch (P1)
Optional Accessories:
WS-TM1 - Fitted and threaded windscreen
TRIPOD - Tripod mic stand
SMT-25 - Shockmount system
CBL-20 - 20’ XLR-XLR quad conductor mic cable
Microphone Characteristics:
User Tips:
Measurement: The TM1 is an excellent choice for room
analysis programs and real time analyzers. Just be sure that you are plugging the microphone into a low
impedance input and that phantom power is available.
Ambient room application: The TM1 may be used to capture the
“room sound” for in ear monitors.Typically, you would set up one microphone on each side of
the stage in a mic stand facing the audience.
Recording: The TM1 is extremely flat and accurate and has an
excellent sound. Because of its small profile, it can be used in conjunction with portable
recording devices for live stereo miking. The TM1 is also excellent for miking acoustic instruments
and room ambience
Dimensions:
Specifications:
Transducer Type ..............................Pre-polarized Condenser
Frequency Response.................. 20 Hz - 25 kHz +/-2dB
Polar Pattern ........................Omni
Output Impedance ...................200 ohms
Sensitivity........................... 6.5mV / Pa @ 1k
Maximum SPL ...............130 dB with distortion < 1% 140 dB Max
Signal to Noise Ratio................. 66 dB
Equivalent Noise Level.............. 28 dB (A weighted)
Dynamic Range................... 112 dB
Power Requirements ............18-52 Volts phantom Connector Switchcraft® male XLR
Polarity ....................Positive pressure on diaphragm produces positive
voltage on pin 2 relative to pin 3 of
output XLR connector