Audio-Technica’s 700 Series Freeway wireless delivers
professional features and sound quality unheard of in its class. These
easy-to-use wireless systems feature eight selectable frequency-coordinated
channels, diversity operation for increased range/reliability, automatic
frequency scanning, Tone Lock™ squelch and more. 700 Series Freeway systems
come equipped with your choice of handheld, headworn, or lavalier microphones;
or choose a system designed for guitar hookup. For multiple-mic applications,
as many as eight systems may be used together.
Features:
8 selectable frequency-coordinated UHF channels
Use up to 8 simultaneous systems—all channels compatible
Automatic frequency scanning
Diversity operation for increased range/reliability
LED Channel display plus Antenna, AF Peak indicators
Balanced XLR and unbalanced ¼” output connector
Tone Lock™ squelch system eliminates interference when
transmitter is off
UniPak® transmitter features: separate guitar/mic trim
control, switchable high/low RF power, internal channel selector, multi-color
battery/power indicator, AA operation
Handheld transmitter features: variable trim control,
internal channel selector, multi-color battery/power indicator, AA operation
Freeway body-pack systems are compatible with all
Audio-Technica Wireless Essentials® microphones and cables
What's in the Box?
ATW-R700 Receiver
ATW-T701 UniPak
Lavalier Microphone
System Component:
The ATW-R700 receiver is a compact, surface mounted unit
with 8 selectable UHF frequencies and diversity switching antennas. The
combination of UHF, diversity operation results in fewer drop outs and noise.
The rear provides both balanced and unbalanced output connections for further
flexibility.
Receiver Control and Functions:
1. ANTENNAS: Position the antennas as shown in Figure B1. Fully
extend both antennas by pulling on the endcaps.
2. AF PEAK INDICATOR: Indicates when maximum transmitter modulation
without distortion has been reached. Not affected by position of Volume control
(Fig. C).
3. LED WINDOW: LED Display indicates channel setting and scanning
operation.
4. DIVERSITY INDICATORS: Indicates which antenna (A or B) has
better reception and is in operation
5. SELECT BUTTON (for manual channel selection):
Press the Select button repeatedly until desired channel is reached.
Press and hold the Set/Scan button to manually set the receiver to indicated
channel. Channel number will stop flashing. (A brief touch of the Set/Scan
button will revert to previously set channel). If the Set button is not pressed
within 10 seconds to confirm the selection, the system will revert to its
original channel.
6. SET/SCAN BUTTON: The Set/Scan button can be used in two
ways: 1) in conjunction with the Select button to permit manual selection of an
operating channel in Manual Set
Mode (see “Select button” description above); and 2) Automatic
Scan/Set Mode, to initiate the automatic channel scan and selection, as
follows:
Automatic Scan/Set Mode: Press and hold the Set/Scan button
for about two seconds. The current channel will flash three times quickly; then
the system will begin to scan for the next open channel. When it finds an open
channel, it will flash the open channel three times and then set the channel.
(If an open channel is not found, the automatic scan will return to the
original channel and flash 5 times.)
8. UNBALANCED AUDIO OUTPUT JACK: 1/4" phone jack. Can be
connected to an unbalanced aux-level input of a mixer, guitar amp or tape
recorder.
9. AF LEVEL (VOLUME) CONTROL: Adjusts audio output level of
both AF Output jacks; maximum output is fully clockwise.
10. BALANCED AUDIO OUTPUT JACK: XLRM-type connector. A
standard 2-conductor shielded cable can be used to connect the receiver output
to a balanced microphone-level input on a mixer or integrated amplifier.
11. CORD HOOK: Loop the cord around the cord hook to keep the
DC plug from pulling out accidentally.
12. POWER INPUT JACK: Connect the DC plug from the included in-line
AC adapter
System Component:
The ATW-T701 bodypack is a compact, light weight unit that
operates on 2 AA alkaline batteries for up to 10 hours (Low mW mode). The input
connector accommodates compatible Audio-Technica microphones and cables for
flexible operation with microphones and instruments. The ATW-T701 provides
switchable output power for increased RF power whenever necessary.
Bodypack Transmitter Controls and Functions
Lavalier microphone
The included miniature cardioid condenser Lavalier
microphone can be worn as a Lavalier, or hidden in loose clothing. Comes with a
55" (1.4 m) terminated cable with locking 4-pin connector for the Audio
Technica UniPak body-pack wireless transmitter.
OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies....................UHF
band, 542.125 MHz to 561.250 MHz
Number of Channels................8V
Frequency Stability................±0.005%,
Phase Lock Loop frequency control