1.) Power Connection - is standard 3-prong IEC power connector.
2.) Power Switch - Press the top of this rocker switch inwards to turn on the subwoofer
3.) Power LED - When the power switch is turned on - and the power cord is connected to an active AC mains supply - this LED illuminates green to indicate that the subwoofer is indeed really on.
4.) XLR Inputs - Balanced XLR female connectors are provided for the left and right inputs
5.) High Pass Outputs - Typically,full range loudspeakers to "split" the work with the Thump 18s subwoofer
6.) Full Range Outputs - Connect the full range outputs to the inputs of another powered subwoofer,powered loudspeakers or to an amplifier powering passive loudspeakers.
7.) Level Knob / OL LED - The level knob adjusts the input sensitivity of the inputs
8.) Normal/Invert Switch (Polarity) - This switch reverses the polarity of the signal going into the subwoofer amplifier by 180°.
Dimension
Specifications:
Acoustic Performance
- Frequency Response (-3 dB) ...........40 Hz - 120 Hz
- Frequency Response (-10 dB) ...........30 Hz - 132 Hz
- Max peak SPL .......................................130 dB
- Crossover Point.......................................140 Hz
- Slope...........................2nd order HP,6th order LP
Transducer
- Woofer Diameter ...............18 in / 457 mm
- Voice Coil Diameter..................3.0 in / 76 mm
- Cone Material......................Paper
- Magnet Material..................Ferrite
Power Amplifier
- Rated Power .....................600 watts rms
- Rated THD.........................< 1 %
- Cooling........................convection
- Design......................Class D
Input/Output
- Input Type.............Female XLR balanced
- Input Impedance.......... 20 KOhm balanced, 20 KOhm unbalanced
- Full Range Outputs................Male XLR balanced
- High Pass Outputs ...................Male XLR impedance balanced
Line Input Power
- US detachable line cord ...............100 - 120 VAC, 50 - 60 Hz, 150W
- EU detachable line cord .................. 220 - 240 VAC, 50-60 Hz, 150w
- AC Connector ........................3 pin IEC 250 vac , 10 A male
- Power Supply Type....................switchmode
Safety Features:
- Input Protection.................Peak and RMS limiting,power supply and amplifier thermal protection
- Display LEDs............................. Front and rear power ON, rear OL limiter
Construction Features
- Cabinet........ Exterior grade 15mm plywood
- Finish...........textured black catalyzed polyurethane paint
- Handles......... one on each side