1.) Power Connection - This is a standard 3-prong IEC power connector

2.) Power Switch - press the top of this rocker switch inwards to turn on the loudspeaker

3.) Fan Vents - Don not obstruct the ventilation openings of the loudspeaker. Fans move air over the heat sinks to cool down the power transistors

4.) Kickstand - The kickstand on the DLM loudspeaker works similarly to a kickstand on a bicycle

5.) XLR and 1/4" Combo Inputs - Channel 1 may accept a mic or line-level signal via XLR or line-level signal via TRS 1/4" cable

6.) Mic/Line Switch (Channel 1 only)  - leave this switch out when connecting a line-level signal to the channel 1 input connector (from a mixer,keyboard or other line level signal source

7.) RCA Inputs (Channel 2 only)- The stereo unbalanced RCA inputs allow you to play a CD player iPod or other line level source

8.) Thru Output- This is a male XLR -type connector that produces exactly the same signal that is connected to the main input jack or a mix of channels 1 and 2

9.) Ch 1 / Mix Switch (Thru Output ) - This switch allows you to choose whether only the channel 1 signal is sent out to the next loudspeaker or if a mix of the channel 1 and 2 signals are sent to the next loudspeaker

10.) OLED Display - is one of the most vital features of the DLM loudspeaker

11.) Channel 1 and 2 Buttons - Press the channel 1 or 2 button repeatedly until the parameter you want to change(for the channel)

12.) Front LED on / Limit / Off - pressing the channel 1 and channel 2 buttons simultaneously gives you the option to turn the front LED on,off or limit

13.) SYS Button - DLM loudspeakers have powerful system processing tools built in.

14.) MEM Button - settings for DLM loudspeakers may be saved to memory and recalled at a later time by utilizing the memory button

15.) Control Lock - The DLM interface may be locked by pressing the SYS and MEM buttons simultaneously

16.)  + and - Buttons - These buttons  work in conjunction with the buttons mentioned previously: Channel 1 and 2, ,MEM and SYS

17.) 2000W / 2W switch - At Mackie we are always striving to push the envelope , dreaming up new awesome products to design in order to expand the boundaries of the pro audio world

Specifications:

Active or Passive

• Active,Class D amplification

Power Capacity

• 1,000WRMS
• 2,000W peak

Low Frequency Driver

• 12"(305 mm) woofer
• 2.5" (64 mm) voice coil diameter
• Paper diaphragm
• Ferrite magnet

High Frequency Driver 

• 1.75"(44 mm) compression driver
• 1" (25 mm) horn entry diameter
• Polyimide film diaphragm
• Ferrite magnet

Frequency Response

• 38Hz to 20 kHz (-10 dB)

Maximum Sound Pressure Level (SPL)

• 128 dB @1 m, calculated

Crossover

• 1.6kHz

Dispersion

• 90°conical

Equalization

•  Lowshelving: ±15 dB @ 80 Hz
• Mid-peaking: ±15 dB @ 2.5 kHz
• High shelving: ±15 dB @ 12 kHz
• Increments: ±3 dB

Amplifier Power

 LowFrequency Amplifier:

• 500W RMS, 1,000W peak
• Rated THD: < 1%
• Cooling: multi-speed fan
• Class D design

High Frequency Amplifier:

• 500W RMS, 1,000W peak
• Rated THD: < 1%
• Cooling: multi-speed fan
• Class D design

Audio Inputs

• 1 xXLR/TRS combo - Channel 1 (XLR is mic/line switchable)
• 1 x XLR/TRS combo - Channel 2 (TRS is a Hi-Z input)
• 2 x RCA phono - Channel 2 (1 x L/R)

Input Impedances

 Channel1:

• Mic: 3.3kΩ balanced
• Line: 20kΩ balanced, 10kΩ unbalanced
• 1/4" TRS: 16kΩ balanced, 8kΩ unbalanced

Channel 2:

• XLR Line: 20kΩ balanced, 10kΩ unbalanced
• 1/4" TRS [Hi-Z instrument]: 1MΩ unbalanced
• RCA: 25kΩ unbalanced

Audio Output

• 1 x XLR- Thru (switchable output, channel 1 or mix)

Mixer Section

• DL2Digital Mixer System Processing:
• EQ: 6 speaker modes
• Alignment delay: 0 to 300 ms
• FX: 16 presets
• Multi-band feedback destroyer: On / Off / Clear / Hold
• Memory: 3 locations for instant venue setting recall andfactory reset

Power Requirements

• 100to 120VAC or 220 to 240VAC, 50/60 Hz, 250W

AC Plug Styl

•  3-pinIEC 250VAC

Operating Temperature Range

• 32to 104°F (0 to 40°C), extended ambient temperature

Construction

•  PC-ABScabinet
• High durability black paint finish
• Top handle
• Powder-coated 20 gauge steel grille
• Three M10 x 17 mm fly points
• 50° monitor angle (using integrated kickstand)

Mounting Options

• Polemount, wall mount or fly via three integrated M10 x 17 mm mounting points

Dimensions (H x W x D)

• 15.9x 15.3 x 14.3" (403 x 389 x 363 mm)

Weight

• 31 lb (14.1 kg)