The MXL FR-310 video mic delivers sound that's as focused as
the video. Mount it onto your camcorder or DSLR camera, and you'll cut to
tighter, cleaner sound recordings.
The FR-310 shuts out sound from the sides
and back, with a pickup pattern that targets sound in front of the camera.
Three gain settings pull in the right amount of sound in close-up or long shot
situations, while a bass roll-off switch leaves low-frequency noise on the
cutting-room floor
The integrated windscreen helps block wind noise, which
aids in keeping your sound in the picture.
Features:
Three-position gain switch
Bass roll-off (high-pass filter)
Standard hot shoe mount
Up to 500 hours per AAA battery
Integrated foam windscreen
Includes AAA Battery & Case
Panel Features:
Attaching the microphone
A standard hot shoe mount is located on the bottom of the
FR-310. Rotating the knurled tightening ring counterclockwise will
make mounting the microphone easier. Tightening the ring after
the microphone is securely in the camera’s hot shoe mount will improve
stability.
The FR-310 is equipped with a captive signal cable that has
a 3.5mm jack. Insert the jack into the external microphone socket on your
recording device
Power
The FR-310 is powered by an internal AAA battery. Use a
fresh battery to get the best performance from the microphone. We also
recommend carrying a spare battery.
A fresh battery should provide up to 500 hours of continuous
recording.
A battery indicator light is located on the right side of
the microphone.
When the indicator light is
illuminated, the battery is close to running out of life and should be replaced.
The light will not be illuminated when
the battery is not close to running out of life or when the microphone is turned off.
The indicator light will flash when the
microphone’s power switch is moved to the “On” position.
Note: Remember to turn the microphone off when it is not in
use.