Peavey PVi 6500
6-Channel Powered Mixer
with 24-Bit Digital FX
Overview
The PV® Series has provided amazing performance and value to countless musicians in a wide range of applications. The PVi Series of mixers carries on that tradition with two economical multi-channel powered mixers loaded with features for spoken-word, performance and pre-recorded audio reinforcement.
- The Peavey® PVi® 6500 is a revolutionary all in one powered mixer. Everything a musician needs providing up to 6 simultaneous combination XLR and 1/4" inputs using Peavey's award winning Silencer® mic preamps, and 400 watts of power for crystal clear audio reproduction. The Peavey PVi 6500 uses exclusive features like Mid Morph EQ to accurately help improve tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's 9 band graphic EQ combined with our revolutionary FLS® Feedback Locating System. The PVi 6500 is equipped with Kosmos, which drastically enhances both the low and high end of the audio spectrum and is exclusively Peavey technology. Footswitchable built in 24 bit digital effects compliment the already feature packed unit by allow the user to select multiple varieties of reverb and delay. Connect almost anything to this versatile mixer via the onboard 1/4", RCA and 1/8" mini jacks.
- FLS® Feedback Locating System
- Master Mute for Channels 1-5
- Combination XLR and 1/4" input jack
- Footswitchable effects defeat and Master Mute
- Kosmos® -C
- 9-Band Graphic EQ
- RCA, 1/8" Media input
- Dual power section with independent control
- RCA Record outputs
- On-board 24 bit digital effects
- LED Meter bridge
- Mid-Morph®
- Power amp sub-sonic filtering
- 15 Volt Phantom Power
- Bluetooth® streaming audio
- Weight Unpacked: 20.02 lb(9.08 kg)
- Weight Packed: 22.29 lb(10.11 kg)
- Width Packed: 14"(35.56 cm)
- Height Packed: 19.75"(50.165 cm)
- Depth Packed: 13"(33.02 cm)
|
Input Sensitivity |
Microphone In to Full Power at the Power Amplifier,
Master Volume Nominal: Full: -40 dBu Nominal: -22 dBu
Line In to Full Power at the Power Amplifier, Master Volume Nominal: Full: -10 dBu Nominal: +8 dBu
|
|
Equalizer |
Channel: Shelving EQ: Low EQ: 80 Hz, ±15 dB
Mid-Morph: Low: 250 Hz, ±15 dB High: 4 kHz, ±15 dB
High EQ: 12 kHz, ±15 dB
Master: 63, 125, 250, and 500 Hz, ±12 dB 1, 2, 4, 8, and 12 kHz, ±12 dB
|
|
Frequency Response |
Microphone to Main: 20 Hz to 20 kHz / +0, -1 dB Line to Main: 20 Hz to 30 kHz / +0, -1 dB Microphone to Amplifier: 50 Hz to 20 kHz / +0, -3 dB Line to Amplifier: 40 Hz to 20 kHz / +0, -3 dB
|
|
Phantom Power |
15 V |
|
Noise |
Main: Main line output, 22 to 22 kHz filter
Amp 1: Amplifier output, loaded at 4 ohms, through AP
AUX-0025 switching amplifier filter
All Controls Full Down: Main: <-95 dBu Amp 1: <-70 dBu
Master Volume Nominal: Main: <-88 dBu Amp 1: <-67 dBu
|
|
THD |
All controls nominal: <0.01% at Main Line Output, -30 dBu in Microphone Input Channel 1 <0.5% at Amp 1 @ 100 W into 4 ohms
All controls nominal: <0.005% at Main Line Output, 4 dBu in Line Input Channel 1 <0.05% at Amp 1 @ 100 W into 4 ohms
|
|
Meter Array |
Limit: -6, -12, -18, -24, and -30 dB |
|
Limiter |
Amplifier Limiter: Limits amplifier power just before clipping |
|
Amplifier Output |
Power: 120 VAC Both channels loaded at 8 ohms: 60 W RMS per channel 120 W peak per channel
Both channels loaded at 4 ohms: 100 W RMS per channel 200 W peak per channel
|
|
Power Requirements |
120 VAC, 50 / 60 Hz 74 W nominal
|
|
Dimensions (H x W x D) |
10.25 x 16.50 x 10.75" (26.04 x 41.91 x 27.31 cm) |
|
Weight |
20.4 lb (9.3 kg) |