PEAVEY XR8300
8ch Powered Mixer
They feature new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey's patented FLS (Feedback Locating System).
Features
- 8 improved, low-noise mic preamps
- 10 line inputs
- 48V phantom power
- 3-band EQ, monitor send and effects send on each channel
- 25 dB pad on channels 1-6
- Signal and Clip indicator on each channel
- Dual Main or Main/Mon power amp mode switch
- Dedicated 7-band graphic for mains and monitors with FLS®
- DDT™ speaker protection
- DSP based effects with parameter control
- Channel mute switch
- Rugged plastic case
- 2x300 watts per channel at 4 ohms
- Weight Unpacked: 38.00 lb(17.236 kg)
- Weight Packed: 44.00 lb(19.958 kg)
- Width Packed: 17.5"(44.45 cm)
- Height Packed: 25.5"(64.77 cm)
- Depth Packed: 17.62"(44.7548 cm)
|
Mic/Line Inputs |
8 |
|
Stereo Line Inputs |
2 |
|
AUX Sends |
1 monitor send |
|
Monitor Outputs |
1 monitor out, stereo RCA record out |
|
EQ Section |
3-band EQ on every channel, dual 7-band graphic EQ |
|
Effects |
Built-in digital effects with reverbs, delays, and chorus |
|
Solo/Mute |
Single mute button for channels 1-6 |
|
Channel Level Control |
Rotary |
|
Trim/Gain Control |
8 mic channels with preamps |
|
Phantom Power |
+48V |
|
Metering |
Signal and peak LED on every channel |
|
Frequency Response |
20Hz - 20kHz, +0dB/-1dB |
|
Total Harmonic Distortion (THD) |
<0.01% 20Hz - 20kHz Mic Input to Main/Monitor Output at Nominal Level (20Hz-80kHz BW) |
|
Signal to Noise Ratio |
>90dB below rated power output, Mic/Line to Speaker Output |
|
Dimensions |
19.0" x 10.75" x 11" (482.6 x 273 x 279.4 mm) |
|
Weight |
41.7 lbs (18.9 kg) |
|
Package Weight |
41.0 lb |
|
Box Dimensions (LxWxH) |
24.5 x 17.6 x 16.8" |