Samson's MCD2 Pro Stereo Passive PC Direct Box is the
ideal solution for connecting unbalanced line level signals from laptops,
CD/MP3 players, and DJ mixers to professional, balanced equipment. Durable,
roadworthy construction and two Mu-metal shielded transformers provide
high-quality signal connection solutions for a variety of live sound and
recording applications.
Custom
STLX Transformers
The MCD2 Pro features two of Samson's STLX Mu-Metal
shielded transformers that deliver an extended, flat frequency response with
ultra-low distortion and superior protection against hum and RF interference.
The MCD2 Pro's balanced outputs provide clean signals that are less susceptible
to noise than unbalanced lines, allowing for longer cable runs.
Input
Options
The MCD2 Pro features dual 1/4", RCA and a stereo
1/8" input to accommodate any line level instrument or consumer audio
connection. Its selectable Stereo/Mono sum switch allows users to accommodate
typical mono "house" PA systems. Additionally, a 2-position 0dB/-12dB
attenuation switch provides users with ample headroom to handle hotter inputs.
Roadworthy
Construction
Housed in a 14-guage noise-reducing steel chassis, the
MCD2 Pro is built to withstand the abuse of the most demanding live tours. Its
rigid outer shell protects all the MCD2 Pro's internal connections, switches
and solder joints from failure, ensuring quiet, reliable performance.
Features
All-metal, impact resistant design
Dual Samson STLX Mu-Metal shielded transformers
Stereo/Mono sum switch
2-position 0dB/-12dB attenuation switch
Ground Lift switch
Dual 1/4" and RCA inputs
Stereo 1/8" input
Dual balanced XLR outputs
No Phantom or Battery power required
SET-UP
The
MCD2 Pro can be quite useful on stage or in the studio for connecting unbalanced
audio sources or instruments with pickups. By utilizing the MCD2 Pro,
the signal can be sent cleanly for long distances while benefiting from the
low noise and common mode rejection provided by the balanced low-level output.
The diagram following shows a typical hook-up for a DJ Controller/Interface
connected to a PA system.
Set
the volume controls of your audio system to the off position.
Connect the stereo outputs of your DJ Controller/Interface or other audio source
to the Left and Right Input jacks of the MCD2 Pro.
Connect the Left and Right BALANCED OUTPUT jacks to a pair of microphone inputs
of a mixer or other audio device.
Pan the input channels of the mixer left and right.
Raise the level of the audio system to the appropriate level.
If you hear a hum or buzz set the GROUND LIFT switch to the LIFT position.
If you hear distortion, set the pad switch to the -12dB position. You may need
to adjust the input level of the mixer to make up for the attenuated signal.
Connecting Laptop
Set
the volume controls of your audio system to the off position.
Connect
the 1/8” stereo output of your laptop or other audio source to the STEREO Input
jack of the MCD2 Pro.
Connect
the 1/4” parallel jacks to active monitor speakers.
Connect
the Left and Right BALANCED OUTPUT jacks to a pair of microphone inputs of a
mixer or other audio device.
Pan the input channels of the mixer left and right.
Raise
the level of the audio system to the appropriate level.
If
you hear a hum or buzz set the GROUND LIFT switch to the LIFT position.
If
you hear distortion, set the pad switch to the -12dB position. You may need to
adjust the input level of the mixer to make up for the attenuated signal.
Specifications
Type------------------ Stereo Passive Direct Box
Frequency Response------------------ 18Hz to 40kHz ±0.1dB