Lavalier Microphone SystemThe Saramonic UwMic10 UHF wireless microphone system is intended for portable wireless operation and can be used in several environments for applications such as DSLR video, field recording, broadcast TV, electronic news gathering (ENG), on-the-spot interviews, and more.
Portable Receiver UwMic10-RX10
The Ares is Saramonic-RX10 Camera UwMic10-MOUNTABLE The Integrated Wireless Receiver. It Ares Features Wide Bandwidth The The The RF Switching, an The Easy-to-read LCD Display and Synchronization between Infrared Transmitter and Receiver.
Receiving Unit:
The UWMIC10's RX-10 receiving unit is a
camera-mountable integrated wireless receiver. It features a wide switching RF
bandwidth, an easy-to-read LCD display and infrared synchronization between
transmitter and receiver.
Equipped with an auto-scan function, the RX10
can automatically search for an available transmission frequency. The headphone
jack enables real-time monitoring or the receiver via headphones, especially
useful for cameras that lack a monitor output.
Transmitting
Unit:
The UWMIC10's TX-10 compact transmitter employs a
crystal-controlled PLL synthesizer. It is equipped with a muting function and a
BMP-type mic input. The RF power output can be switched among high, middle and
low.
Features:
*Reliable, broadcast-quality audio
*Wireless transmitter with lavalier microphone
*UHF frequency range: 614 MHz - 696 MHz
*96 selectable channels in 2 groups
*330 Operates Over '(100m) Open Areas, in. Or 200' (60m) with obstacles
*Easy to read LCD displays
Product
Structure
① Antennas
② Power button
Press
to turn on or off the RX10.
③ SET button
Long
press the SET button to enter the displayed menu.
Then,
short press the SET button to confirm your option or
long
press again to exit without saving.
④ POWER indicator
Indicates
the battery level as follows:
Green
light: Sufficient battery level.
Red
light: Low battery level.
⑤ RF indicator and infrared transmitter port
The
infrared transmitter port sends the set frequency to a
transmitter.
RF
indicator displays the RF input level as follows:
Green
light: RF signal is strong.
Red
light: RF signal is weak or disconnected.
⑥ + or – button
Selects
functions or values shown on the display.
⑦ LCD display
Display
menus, please refer to "LCD Display Operation
Guide"
(page 5) for more details.
⑧ Battery compartment
Operates
on two AA batteries (not included).
⑨ PHONE jack
It
is a 3.5mm diameter and stereo mini headphone jack.
Connect
a headphone to monitor the audio output.
Note: Please do not
connect a headphone with a monaural
mini
jack. As this may short-circuit the headphone
jack
and distorted sound output.
⑩ OUTPUT jack
Connect
the RX10 to a video camera, camcorder, mixer or
Amplifier
with the supplied output cable.
⑪ Standard cold shoe
Packing list
TX10
Body-pack transmitter: TX10
Omni-directional lavalier microphone
Microphone holder clip
Wind screen
Belt clip
RX10
•
Portable
receiver: RX10
•
Shoe
mount adapter
•
Belt
clip
•
XLR-BMP
audio output cable
•
3.5mm
plug-bmp audio cable
Specifications